[BUG] Boot hangs at "Started Update UTMP about System Runlevel Changes" when Pi0 is installed in a PoE/ETH/USB HUB HAT

[Spessmen14]

Describe the bug After flashing a new image to a MicroSD card, when properly installed in the Waveshare PoE/ETH/USB HUB HAT, the boot stalls at the step "Started Update UTMP about System Runlevel Changes" and never completes.

https://www.waveshare.com/wiki/PoE/ETH/USB_HUB_HAT To Reproduce Steps to reproduce the behavior:

1. Flash new pwnagotchi image (have tried official and the prepatched WaveshareV3 version from here: https://archive.org/details/pwnagotchi_1.5.5_WSV3Patched) to a Micro SD car
2. Boot by connecting MicroUsb cable to DATA port on the HAT and a HDMI cord to the HDMI plug
3. System hangs at the UMTP prompt

Expected behavior Boot to Pwn welcome info and console

Environment (please complete the following information):

• Pwnagotchi version 1.5.5
• OS version : Windows 7, 64 bit
• Type of hardware - Original Pi 0
• Any additional hardware used: https://www.waveshare.com/wiki/PoE/ETH/USB_HUB_HAT

Additional context I have tried with an old MicroSD card and a brand-new, Industrial-grade MicroSD card from Kingston. Same result.

[strange-world]

I am also experiencing this issue where boot will hang at 'Started Update UTMP about System Runlevel Changes.'

Environment pwnagotchi-raspbian-lite-v1.5.5.img OS version : Windows 11, 64 bit Type of hardware - Original Pi 0 W Micro SD - SanDisk 32GB (SDSQUA4-032G-GN6MT) and also tried SAMSUNG EVO 256GB (FAT32) (MB-ME256KA/AM)

I have tried re-flashing and re-formatting .img to both SDs and booting with data chord only, power chord only, and data+power. I have used the instructions on Pwnagotchi site for Config.toml file and attempted boot without toml file.

Hopefully someone will figure this one out, but I also will be trying to follow setup from here: https://www.youtube.com/watch?v=gyKT_mASSuc&t=609s and https://github.com/Xyl0se/Pwnagotchi-new-guerilla-guide as these seem to be the most recent instructions out there.

[MCKLtech]

Found this by Google, I'm having this issue too. Has anyone solved it?

I've tried multiple SD cards and flashes.