Gcode for Octoprint

[PeterJBurke]

Request: Enable gcode generation that works with Octoprint. Using gcode generated from the "Dreamer NX" printer definition in CURA 4.9, I can load the gcode to Octoprint and it prints on the Flashforge dreamer.

Using gcode generated from the "Creater Pro" printer definition (this repo) in CURA 4.9, I can load the gcode to Octoprint and it gives a "file error" on the Flashforge Dreamer printer.

My system: uname -a Linux i9GarageV2 5.4.0-72-generic #80-Ubuntu SMP Mon Apr 12 17:35:00 UTC 2021 x86_64 x86_64 x86_64 GNU/Linux

Cura 4.9 XGwriter installed

Octoprint Version 1.4.0

Flashforge Dreamer

[loshlee]

Have you tried GPX (gcode to x3g converter, elsewhere here at GitHub)? I wonder if you might be able to customize the conversion routine for the gcode to eliminate the file error.

[Hammerhead753]

Request: Enable gcode generation that works with Octoprint. Using gcode generated from the "Dreamer NX" printer definition in CURA 4.9, I can load the gcode to Octoprint and it prints on the Flashforge dreamer.

Using gcode generated from the "Creater Pro" printer definition (this repo) in CURA 4.9, I can load the gcode to Octoprint and it gives a "file error" on the Flashforge Dreamer printer.

My system: uname -a Linux i9GarageV2 5.4.0-72-generic #80-Ubuntu SMP Mon Apr 12 17:35:00 UTC 2021 x86_64 x86_64 x86_64 GNU/Linux

Cura 4.9 XGwriter installed

Octoprint Version 1.4.0

Flashforge Dreamer

You need to uninstall the x3gwriter from Cura, then add the GPX Plug in to Octoprint https://plugins.octoprint.org/plugins/gpx/ by doing this you are having Octoprint convert the gcode to x3g instead of your slicer. This works, this is how I do it. You won't see anything in Octoprint to confirm it has been converted, just upload the gcode file and print. This method also allows you to use a different slicer, I'm still experimenting with using this machine on Prusaslicer.