Build files for ESP Thread Border Router v1.2 board (TZ-642)

[djorr5]

Hi,

Are there build files available for the above board? I would like to add additional circuitry to it without having to re-do all the vias for RF tuning.

[chshu]

@djorr5 The schematic file is available here: https://docs.espressif.com/projects/esp-thread-br/en/latest/hardware_platforms.html#related-documents.

Could you specify what kinds of build files are you looking for? We will check internally if these can be shared.

[djorr5]

The gerbers basically. I could use the PDF schematic to create them but ideally the already created ones would be a massive time saver. Also you have a lot of vias on the board, I assume for RF and you board would be tuned already. I don't want to have to do that part again.

On Mon, 19 Feb 2024, 10:27 pm Shu Chen, @.***> wrote:

@djorr5 https://github.com/djorr5 The schematic file is available here: https://docs.espressif.com/projects/esp-thread-br/en/latest/hardware_platforms.html#related-documents .

Could you specify what kinds of build files are you looking for? We will check internally if these can be shared.

— Reply to this email directly, view it on GitHub https://github.com/espressif/esp-thread-br/issues/60#issuecomment-1952249247, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABLYS3LDFLYWRLPOIRAJOGDYUMZI7AVCNFSM6AAAAABDPHOVDWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNJSGI2DSMRUG4 . You are receiving this because you were mentioned.Message ID: @.***>

[chshu]

@djorr5 The NDA may be required to share the gerber file, could you please get in touch with us via https://www.espressif.com/en/contact-us/sales-questions.

[djorr5]

Hi. Every time I try to submit the form at sales-question it fails.

On Mon, 19 Feb 2024 at 23:02, Shu Chen @.***> wrote:

@djorr5 https://github.com/djorr5 The NDA may be required to share the gerber file, could you please get in touch with us via https://www.espressif.com/en/contact-us/sales-questions.

— Reply to this email directly, view it on GitHub https://github.com/espressif/esp-thread-br/issues/60#issuecomment-1952306483, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABLYS3OGUHZXW4C6ZOOYYVTYUM5PDAVCNFSM6AAAAABDPHOVDWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNJSGMYDMNBYGM . You are receiving this because you were mentioned.Message ID: @.***>

[chshu]

@djorr5 Could you send an email to [email protected]?

[martin8310]

I would be happy about these files too! Tasmota does that too ;-)

[chshu]

Please contact us via https://www.espressif.com/en/contact-us/sales-questions to request the build/gerber files.