esp-serial-flasher
esp-serial-flasher copied to clipboard
espressif
Library for flashing Espressif SoCs from other MCUs.
### Port STM32 ### Target chip ESP32-C6 ### Hardware Configuration Host mcu is STM32F407VGT6TR , esp32c6 connected to stm32 via uart and baudrate is 115200 ### Log output ```plain nothing...
### Port STM32 ### Target chip ESP32C3 ### Hardware Configuration GPI0_08 =1 GPI0_09 = 0 GPI0_02=0 baudate=115200, no parity and 1 stopbit  I did not get any any error...
Add stub loader support as requested by #92 and #84. The stubs are pulled from https://github.com/espressif/esptool/tree/master/esptool/targets/stub_flasher. A CMake target called `gen_esp_stubs` pulls the json files from a specified esptool version...
### Port USER_DEFINED ### Target chip ESP32-S3 ### Hardware Configuration Custom ESP32-S3 board connected via USB CDC ### Log output ```plain Found 2 serial ports Connecting to ttyACM0 Found esp32s3...
### Port ESP, NXP (LPC54628) ### Target chip ESP32-WROOM-32E ### Hardware Configuration NXP development kit board (OM13098 - LPCXpresso54628) to record the ESP32-WROOM-32E by UART communication. ### Log output ```plain...
I'm trying to upload a firmware bin file from an ESP32 to an ESP8266. The test firmware hello world, the bin file of which comes with your library, is uploaded...
For a board I made using the esp32s3 I also have a desktop client written in c++. It would be great if users could update the firmware directly from the...
https://store.arduino.cc/usa/nano-33-iot The Arduino Nano 33 IoT is a low-cost Arduino board with a SAMD21 host processor and U-Blox NINA modem. The firmware is [custom](https://github.com/arduino/nina-fw) with an [Arduino tool](https://www.arduino.cc/en/Tutorial/WiFiNINAFirmwareUpdater) to update...
I am looking for library to set ant read efuses. Is there something like this project to control efuses?
