mesh lite OTA error (AEGHB-782)

[yel-best]

Hi

use ESP-IDF 5.1.3 use MESH-LITE 0.10.3

I don't understand why. My firmware suddenly had such an error today when performing OTA. The app_1 partition could not be overwritten normally, causing the OTA to fail. There were not many error prompts. Please help me find out what caused it.

I have tried firmware packages of 1M & 1.62M in size, but both failed to OTA normally. The http prompt said that the download was successful and the partition was 4M in size.

My Partition Table

*******************************************************************************
# ESP-IDF Partition Table
# Name, Type, SubType, Offset, Size, Flags
nvs,data,nvs,0x10000,24K,
otadata,data,ota,0x16000,8K,
phy_init,data,phy,0x18000,4K,
factory,app,factory,0x20000,2M,
ota_0,app,ota_0,0x220000,4M,
ota_1,app,ota_1,0x620000,4M,
coredump,data,coredump,0xa20000,64K,
reserved,data,254,0xa30000,128K,
fctry,data,nvs,0xa50000,24K,
storage,data,spiffs,0xa56000,36K,
******************************************************************************

I (258771) app_bee_ota: Image bytes read: 1331200
I (259570) app_bee_ota: Image bytes read: 1382400
I (260411) app_bee_ota: Image bytes read: 1433600
I (261200) app_bee_ota: Image bytes read: 1484800
I (261834) app_bee_ota: Image bytes read: 1536000
I (262553) app_bee_ota: Image bytes read: 1587200
I (262698) app_bee_ota: Reporting IN_PROGRESS: Firmware Image download complete
W (262698) app_bee_ota_using_topics: app_bee_ota_using_topics::Firmware Image download complete
I (262705) app_bee_ota_using_topics: {"id":"9bd8dbcc-e1c0-4af8-be30-f259fea8370b","status":"IN_PROGRESS","message":"Firmware Image download complete"}
W (262719) app_bee_mqtt: Publishing to /iot/xz7v8bn3my/otareply
I (262732) app_bee: bee mqtt msg published.
I (263227) wifi:Set ps type: 1, coexist: 0

I (263227) esp_https_ota: esp_https_ota_finish start...
I (263228) esp_image: segment 0: paddr=00220020 vaddr=3c100020 size=6cce0h (445664) map
ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0x8 (TG1WDT_SYS_RST),boot:0x9 (SPI_FAST_FLASH_BOOT)
Saved PC:0x403783c3