arduino-esp32 ESP32-S3 WIFI START-STOP-START KO with ESPAsyncWebServer (OK with ESP32)

Board

ESP32-S3

Device Description

ESP32-S3 : AI Thinker ESP-S3-12K FLASH 4Mb PSRAM 8Mb

Test has also been done (not shown) with : ESP32-S2 : SAOLA WROVER FLASH 4Mb PSRAM 8Mb ESP32 : LILYGO T8 V.1.7.1 4Mb PSRAM 8Mb

Hardware Configuration

Nothing is attached to development board, excepted USB cable between computer and development board (ie bare development board)

Version

v2.0.4

IDE Name

Arduino IDE

Operating System

Windows 10

Flash frequency

80 Mhz

PSRAM enabled

yes

Upload speed

115200

Description

On ESP32-S3, WIFI is KO when triggering starting (#1), stopping and (re)starting (#2) Wifi with ESPAsyncWebServer.

Same KO behaviour for ESP32-S2.

Note this issue does not occur on ESP32 : in other words, it is possible to start/stop/(re)start wifi on ESP32. Maybe there is a regression on ESP32-S3 and ESP32-S2, or the way to stop/(re)start Wifi has changed on ESP32-S3 and ESP32-S2 as compared to ESP32 ?

Such sequence is needed for project because user should be able to activate/deactivate Wifi on his/her own. Since Wifi consumes resources/battery, Wifi should be off when/if user does not need it. Project relies on batteries for power.

On ESP32-S3 (and ESP32-S2), the only way to reactivate Wifi after (re)start #2 is to reboot, which is not user friendly.

Tests have also been done with Wifi Station (not shown) : same KO behaviour for ESP32-S3 and ESP32-S2, and OK behaviour for ESP32. So it seems that issue is not due to Wifi Access Point vs Wifi Station (since same issue occurs) but to ESP32-S3 and ESP32-S2.

Screenshot 1 screenshot1

Screenshot 2 screenshot2

Sketch

See sketch and html page below
------
SKETCH
------
// Wifi issue "start stop start",  esp32s3 ko, esp32s2 ko, esp32 ok, Sep 19 2022

// Debugging
char* TAG = "TEST";

// LittleFS
// ========
#include <LittleFS.h>

// STORAGE
// =======
#define STORAGE LittleFS // file system to use for Web static files (html, png, ...) : SD, LittleFS, SPIFFS, ...

 
// Wifi & Web Server Espressif
// ===========================
#include <AsyncTCP.h>
#include <ESPAsyncWebServer.h> // includes Wifi.h : #ifdef ESP32 #include <WiFi.h>

// Web Server
// ==========
// Set IP addresses
IPAddress gateway(192, 168, 1, 1);
IPAddress subnet(255, 255, 0, 0);
IPAddress ipAccessPoint; // IP adress for Wifi Access Point, usually 192.168.4.1, retrieved with softAPIP()

// Access point
const char* ssid_accesspoint = "ESP32_AP";
const char* password = "password_";

// Create AsyncWebServer "server" on port 80 https://github.com/me-no-dev/ESPAsyncWebServer#the-async-web-server
AsyncWebServer server(80);

// Create AsyncWebSocket "ws" https://github.com/me-no-dev/ESPAsyncWebServer#async-websocket-plugin
AsyncWebSocket ws("/ws");

// Setting up the server
// ---------------------
// https://github.com/me-no-dev/ESPAsyncWebServer#setting-up-the-server

void onRequest(AsyncWebServerRequest *request){
  //Handle Unknown Request
  request->send(404);
}

// Send asynchroneous message to brower(s) using web socket, usually for notifying error message (displayed in javascript popup window)
void notifyClients(String state) {
  ws.textAll(state);
}

// Parse web socket message parameters and trigger action accordingly
void handleWebSocketMessage(void *arg, uint8_t *data, size_t len) {  
  AwsFrameInfo *info = (AwsFrameInfo*)arg; 
  char * data_tok;  // local variable to split data by token ":"  
  if (info->final && info->index == 0 && info->len == len && info->opcode == WS_TEXT) { 
    data[len] = 0;
    // ... not needed for test
  }
}

void onEvent(AsyncWebSocket *server, AsyncWebSocketClient *client, AwsEventType type,
             void *arg, uint8_t *data, size_t len) {
  switch (type) {
    case WS_EVT_CONNECT:
      ESP_LOGI(TAG,"WebSocket client #%u connected from %s", client->id(), client->remoteIP().toString().c_str());
      break;
    case WS_EVT_DISCONNECT:
      ESP_LOGI(TAG,"WebSocket client #%u disconnected", client->id());
      break;
    case WS_EVT_DATA:
      ESP_LOGI(TAG,"handleWebSocketMessage(arg, data, len) id %s len %d", data, len);        
      handleWebSocketMessage(arg, data, len);
      break;
    case WS_EVT_PONG:
      ESP_LOGI(TAG,"WebSocket client PONG");
      break;   
    case WS_EVT_ERROR:
      ESP_LOGI(TAG,"WebSocket client EVTERROR");
      break;
  }
}

void notFound(AsyncWebServerRequest *request) {
  String logmessage = "Client:" + request->client()->remoteIP().toString() + " " + request->url();
  ESP_LOGE(TAG, "ERROR notFound %s", logmessage.c_str());
  request->send(404, "text/plain", "Not found");
}

void wifiStart() { // init Wifi, set preferences and play sound accordingly
    WiFi.softAP(ssid_accesspoint, password);
    ipAccessPoint = WiFi.softAPIP();
    WiFi.mode(WIFI_MODE_AP);   // set mode to Access Point

    // attach AsyncWebSocket
    ws.onEvent(onEvent);
    server.addHandler(&ws);
       
    // Route for web pages
    server.on("/", HTTP_GET, [](AsyncWebServerRequest *request){
      request->send(STORAGE, "/home.html", "text/html", false);      
    });

    server.on("/home", HTTP_GET, [](AsyncWebServerRequest *request){
      request->send(STORAGE, "/home.html", "text/html", false);
    }); 
    
   // attach file system root at url /
   server.serveStatic("/", STORAGE, "/");

  // Catch-All Handlers
  // Any request that can not find a Handler that canHandle it ends in the callbacks below.
  server.onNotFound(onRequest);
  //server.onFileUpload(onUpload);
  // server.onRequestBody(onBody);
    
   // Start server
   server.begin(); // class of server is "AsyncWebServer", defined in "ESPAsyncWebServer.h"
      
   ESP_LOGD(TAG,"Wifi : Init OK");
   if (WiFi.getMode()==WIFI_MODE_AP) { // Access point      
          ESP_LOGI(TAG,"softAPSSID: %s",ssid_accesspoint);
          ESP_LOGI(TAG,"softAPIP: %s", ipAccessPoint.toString().c_str());
          ESP_LOGI(TAG,"mode: %d", WiFi.getMode());          
   }             
} // end wifiStart


// =======================================================================
// setup
// =======================================================================
void setup()
{ Serial.begin(115200);

  // LittleFS
  // ======
  if (!LittleFS.begin(true)) ESP_LOGE(TAG, "ERROR : An error has occurred while mounting LittleFS"); 
} // end setup()

// =======================================================================
// loop
// =======================================================================
void loop() {

  ESP_LOGD(TAG,"Wifi : Setting AP (Access Point) %s",ssid_accesspoint);

  // Wifi start #1
  wifiStart();
  ESP_LOGI(TAG,"----------------- :-) ------------------->");    
  ESP_LOGD(TAG,"After Wifi start #1, NO ISSUE : Web page is reachable on Wifi Access Point for ESP32-S3");
  ESP_LOGD(TAG,"See screenshot #1");  
  ESP_LOGD(TAG,"Not shown : Web page is also reachable on Wifi Access Point for ESP32-S2 and ESP32");  
  ESP_LOGD(TAG,"Not shown : Same OK behaviour with Wifi Station");
  ESP_LOGI(TAG,"----------------------------------------->");   
  vTaskDelay(60000 / portTICK_PERIOD_MS);

  // Wifi stop
  WiFi.disconnect(true);  // Disconnect from the network
  WiFi.mode(WIFI_OFF);    // Switch WiFi off
  vTaskDelay(30000 / portTICK_PERIOD_MS);

  // Wifi Start #2  
  wifiStart();
  ESP_LOGI(TAG,"----------------- :-/ ------------------->");      
  ESP_LOGD(TAG,"After Wifi start #2, ISSUE : Web page is no longer reachable on Wifi Access Point for ESP32-S3 (Wifi network no longer visible)");
  ESP_LOGD(TAG,"See screenshot #2");  
  ESP_LOGD(TAG,"Not shown : ESP32-S2 is also KO, but ESP32 is OK");    
  ESP_LOGD(TAG,"Not shown : Same issue with Wifi Station");
  ESP_LOGI(TAG,"----------------------------------------->");
  
  // endless loop
  while (true) {
    ESP_LOGD(TAG,"loop ...");
    vTaskDelay(5000 / portTICK_PERIOD_MS);     
  }

} // end loop

----
HTML
----
<!DOCTYPE html>
<html>
<head>
  <title>TEST</title>
  <meta charset="utf-8">
  <meta name="viewport" content="width=device-width, initial-scale=1">
</head>

<body>
<h1>Hello World :-) </h1>
</body>
</html>

Debug Message

See serial output below (verbose)
ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0x1 (POWERON),boot:0x8 (SPI_FAST_FLASH_BOOT)
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce3808,len:0x43c
load:0x403c9700,len:0xbec
load:0x403cc700,len:0x2a3c
SHA-256 comparison failed:
Calculated: 3611f330726ad4edf64f62982b0568332a5800bc59425cab90be5379db92c108
Expected: ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
Attempting to boot anyway...
entry 0x403c98d8
[  1062][I][esp32-hal-psram.c:96] psramInit(): PSRAM enabled
[  1073][D][ESP32-S3_wifistartstopstart_test.ino:144] loop(): [TEST] Wifi : Setting AP (Access Point) ESP32_AP
[  1081][D][WiFiGeneric.cpp:929] _eventCallback(): Arduino Event: 0 - WIFI_READY
[  1116][V][WiFiGeneric.cpp:390] _arduino_event_cb(): AP Started
[  1116][D][WiFiGeneric.cpp:929] _eventCallback(): Arduino Event: 10 - AP_START
[  1118][D][ESP32-S3_wifistartstopstart_test.ino:119] wifiStart(): [TEST] Wifi : Init OK
[  1126][I][ESP32-S3_wifistartstopstart_test.ino:121] wifiStart(): [TEST] softAPSSID: ESP32_AP
[  1134][I][ESP32-S3_wifistartstopstart_test.ino:122] wifiStart(): [TEST] softAPIP: 192.168.4.1
[  1142][I][ESP32-S3_wifistartstopstart_test.ino:123] wifiStart(): [TEST] mode: 2
[  1150][I][ESP32-S3_wifistartstopstart_test.ino:148] loop(): [TEST] ----------------- :-) ------------------->
[  1159][D][ESP32-S3_wifistartstopstart_test.ino:149] loop(): [TEST] After Wifi start #1, NO ISSUE : Web page is reachable on Wifi Access Point for ESP32-S3
[  1173][D][ESP32-S3_wifistartstopstart_test.ino:150] loop(): [TEST] See screenshot #1
[  1181][D][ESP32-S3_wifistartstopstart_test.ino:151] loop(): [TEST] Not shown : Web page is also reachable on Wifi Access Point for ESP32-S2 and ESP32
[  1194][D][ESP32-S3_wifistartstopstart_test.ino:152] loop(): [TEST] Not shown : Same OK behaviour with Wifi Station
[  1204][I][ESP32-S3_wifistartstopstart_test.ino:153] loop(): [TEST] ----------------------------------------->
[  8273][V][WiFiGeneric.cpp:405] _arduino_event_cb(): AP Station Connected: MAC: 8c:c6:81:ef:1e:7e, AID: 1
[  8274][D][WiFiGeneric.cpp:929] _eventCallback(): Arduino Event: 12 - AP_STACONNECTED
[  8294][V][WiFiGeneric.cpp:419] _arduino_event_cb(): AP Station IP Assigned:192.168.4.2
[  8294][D][WiFiGeneric.cpp:929] _eventCallback(): Arduino Event: 14 - AP_STAIPASSIGNED
[ 61216][V][WiFiGeneric.cpp:412] _arduino_event_cb(): AP Station Disconnected: MAC: 8c:c6:81:ef:1e:7e, AID: 1
[ 61216][D][WiFiGeneric.cpp:929] _eventCallback(): Arduino Event: 13 - AP_STADISCONNECTED
[ 61216][V][WiFiGeneric.cpp:393] _arduino_event_cb(): AP Stopped
[ 61228][D][WiFiGeneric.cpp:929] _eventCallback(): Arduino Event: 11 - AP_STOP
[ 91274][D][WiFiGeneric.cpp:929] _eventCallback(): Arduino Event: 0 - WIFI_READY
[ 91284][V][WiFiGeneric.cpp:390] _arduino_event_cb(): AP Started
[ 91284][D][WiFiGeneric.cpp:929] _eventCallback(): Arduino Event: 10 - AP_START
[ 91286][D][ESP32-S3_wifistartstopstart_test.ino:119] wifiStart(): [TEST] Wifi : Init OK
[ 91294][I][ESP32-S3_wifistartstopstart_test.ino:121] wifiStart(): [TEST] softAPSSID: ESP32_AP
[ 91302][I][ESP32-S3_wifistartstopstart_test.ino:122] wifiStart(): [TEST] softAPIP: 192.168.4.1
[ 91310][I][ESP32-S3_wifistartstopstart_test.ino:123] wifiStart(): [TEST] mode: 2
[ 91318][I][ESP32-S3_wifistartstopstart_test.ino:163] loop(): [TEST] ----------------- :-/ ------------------->
[ 91327][D][ESP32-S3_wifistartstopstart_test.ino:164] loop(): [TEST] After Wifi start #2, ISSUE : Web page is no longer reachable on Wifi Access Point for ESP32-S3 (Wifi network no longer visible)
[ 91345][D][ESP32-S3_wifistartstopstart_test.ino:165] loop(): [TEST] See screenshot #2
[ 91352][D][ESP32-S3_wifistartstopstart_test.ino:166] loop(): [TEST] Not shown : ESP32-S2 is also KO, but ESP32 is OK
[ 91363][D][ESP32-S3_wifistartstopstart_test.ino:167] loop(): [TEST] Not shown : Same issue with Wifi Station
[ 91372][I][ESP32-S3_wifistartstopstart_test.ino:168] loop(): [TEST] ----------------------------------------->
[ 91382][D][ESP32-S3_wifistartstopstart_test.ino:171] loop(): [TEST] loop ...
[ 96389][D][ESP32-S3_wifistartstopstart_test.ino:171] loop(): [TEST] loop ...
[101389][D][ESP32-S3_wifistartstopstart_test.ino:171] loop(): [TEST] loop ...

Other Steps to Reproduce

As stated above, issue :

does not occur with ESP32
occurs also with Wifi Station

I have checked existing issues, online documentation and the Troubleshooting Guide

[X] I confirm I have checked existing issues, online documentation and Troubleshooting guide.

Sep 19 '22 07:09 06GitHub

Is ESPAsyncWebServer really working with other MCUs than ESP32. https://github.com/me-no-dev/ESPAsyncWebServer/issues/951

Sep 19 '22 08:09 Jason2866

As per my usage, ESPAsyncWebServer works nicely on ESP32-S2 and ESP32-S3, as long as one does not START-STOP-(RE)START WIFI. For instance, START and STOP-START WIFI sequence behaves OK, ESPAsyncWebServer is up and running and pages are displayed correctly (no "Connection has timed out" error)

Sep 19 '22 08:09 06GitHub

@06GitHub Your sketch with a S3 (AI Thinker ESP-S3-12K FLASH 8Mb PSRAM 8Mb) Bildschirmfoto 2022-09-19 um 17 59 51

Ahh, yes. It is offline after stop / start

Sep 19 '22 16:09 Jason2866

@Jason2866 Thanks for spending some time to check this :-)

Ahh, yes. It is offline after stop / start

So same issue occurs on your side, good information !

Sep 19 '22 16:09 06GitHub

Imho the ESPAsyncWebServer needs to be reviewed. There are open issues and unmerged PRs for.

Sep 29 '22 11:09 Jason2866

ESPAsyncWebServer is brilliant work. Sadly it appears to have been abandoned by the owner.

Oct 14 '22 13:10 mrengineer7777

hopefully soon

Oct 14 '22 14:10 me-no-dev

ESP32-S3 WIFI START-STOP-START is now OK as per test (re)done today Sep 2 2023, see configuration below.

Wifi is up again after START-STOP-START sequence, no need to reboot ESP32-S3 after STOP.

Problem was encountered about 1 year ago with "arduino-esp32 core" version 2.0.4. Behaviour is now OK with "arduino-esp32 core" version 2.0.9.

=> Issue Closed

Configuration

MCU: ESP32-S3-WROOM-1-N16R8 (Flash 16Mb PSRAM 8Mb)
Arduino ESP32 Core :  v2.0.9
Arduino IDE : 1.8.19
Windows 10

Sep 02 '23 17:09 06GitHub

arduino-esp32 arduino-esp32 copied to clipboard

ESP32-S3 WIFI START-STOP-START KO with ESPAsyncWebServer (OK with ESP32)

Board

Device Description

Hardware Configuration

Version

IDE Name

Operating System

Flash frequency

PSRAM enabled

Upload speed

Description

Sketch

Debug Message

Other Steps to Reproduce

I have checked existing issues, online documentation and the Troubleshooting Guide

arduino-esp32
arduino-esp32 copied to clipboard