After a few commands, Atom echo hangs.

[draggero]

Hi, I have two problems with Atom Echo:

1. When I use it multiple times to issue a command using the wake word, it can hang for some time or until it is restarted. (ver. 2024.2.0)
2. When I try to upload m5stack-atom-echo.yaml, it stops properly capturing voice. I have to bring the device close to my mouth for it to capture anything. When I upload the preinstalled firmware (2024.2.0), it works fine, but the problem described in point 1 occurs. Any ideas?

[draggero]

Ad2. It works for me https://github.com/esphome/issues/issues/6059#issuecomment-2241205451

But still sometimes it hangs [10:07:00][E][voice_assistant:806]: Cannot receive audio, buffer is full

[Evanito]

Fixed if you use the new wake word v2 firmware. The existing "stream" mode is where this behavior is happening. Was able to reproduce it myself.

[Taomyn]

I was having issues as well since the latest adopted firmware was released, so I switched to:

m5stack.atom-echo-voice-assistant: github://esphome/firmware/wake-word-voice-assistant/m5stack-atom-echo.adopted.yaml@main

And except with a ton of yellow warning during compilation, more than i have ever seen before, it seems to be working but only time will tell as it happens quite randomly and after a long time for me.

[draggero]

I was having issues as well since the latest adopted firmware was released, so I switched to:

m5stack.atom-echo-voice-assistant: github://esphome/firmware/wake-word-voice-assistant/m5stack-atom-echo.adopted.yaml@main

And except with a ton of yellow warning during compilation, more than i have ever seen before, it seems to be working but only time will tell as it happens quite randomly and after a long time for me.

Where I should change it?

[Taomyn]

I was having issues as well since the latest adopted firmware was released, so I switched to: m5stack.atom-echo-voice-assistant: github://esphome/firmware/wake-word-voice-assistant/m5stack-atom-echo.adopted.yaml@main And except with a ton of yellow warning during compilation, more than i have ever seen before, it seems to be working but only time will tell as it happens quite randomly and after a long time for me.

Where I should change it?

Replacing the current line under "Packages:" in your yaml config file for the device.

[github-actions[bot]]

As there has been no activity on this issue for 30 days, I am marking it as stale. If you think this is a mistake, please comment below and I will remove the stale label.

[github-actions[bot]]

This issue has been closed due to inactivity. If you think this is a mistake, please comment below.