ericlangel

Oh dear... never tried. I opened issue #44 for that

@i3dm can you check the actual master branch with the jetcat Sensor?

ah, ok. no Problem. We will see if someone else will check the JetCat Sensor I would like to see if it work on the real system.

@magnum3131 could you try the new Version of the library? Some issues are solved (nothing real important) and a new Feature is coded: reading Sensor Values of all SBUS Sensors...

i have attached the new library and an Example sketch. please change the SBUS2 Pins to your used SBUS2 Pins. leave Pin 16 and 17 unconnected -> that is another...

@magnum3131 i have a new Library Version which should work with 1k resistor and multiple Sensors (without diode or Voltage loss) the TX Pin is just active (OUTPUT) when sending...

[edit] File removed here the update for explanation: the example sketch also sends sbus2 Frames on Serial2 -> so leave Pin 16 and 17 unconnected or use your sketch and...

ok, you could erase all Serial2 code in the example sketch or use your old sketch and just update the library sources

tonight i realized that the zip file i gave you wont work. because Change TX to Float and back to TX is hardcoded to GPIO 26 i will change it...

Did you had a look the Site of Alex K.? https://sites.google.com/site/sbus2diy/home/sbus2protocol-part2/sbus2protocol-part3  The SBS-02G could be the same Format as SBS-01G Please give us more informations: how much slots? where...