EmuFlight
EmuFlight copied to clipboard
Target Request: SPEEDYBEEF7MINI
Vendor/Model
SPEEDYBEEF7MINI
SpeedyBee F7 Mini 35A 3-6S 8-bit Flight Controller
https://www.speedybee.com/speedybee-f7-mini-35a-3-6s-8-bit-flight-controller-stack/
CLI dump or Unified Target https://github.com/betaflight/unified-targets/blob/master/configs/default/SPBE-SPEEDYBEEF7MINI.config
Needs tested! Check gyro orientation, motor arrangement, flash, osd, vtx control, BLUETOOTH, everything else if possible please update here with feedback that it works or needs improvement. PROPS OFF FOR SAFETY
EmuFlight_0.4.0_SBF7MINI_Build_667759227.zip
Note: May have slow connection issues on USB. Need feedback if this is an issue. Edit: Added BLHELI interface. Shortened named.
Bit of a late reply from me, but I have this fc and will test on version 0.4.0
Bit of a late reply from me, but I have this fc and will test on version 0.4.0
@baboon9999 , please report working conditions for any/all of the following ✔️/❌ Flash ✔️/❌ Gyro ✔️/❌ Accelerometer ✔️/❌ Motors ✔️/❌ Onboard ADC ✔️/❌ OSD (analog) ✔️/❌ Smart Audio controls (OSD and CLI) ✔️/❌ Alarm switch ✔️/❌ Barometer ✔️/❌ BlueTooth ✔️/❌ Blackbox ✔️/❌ LED ✔️/❌ GPS
Some feedback. ✔️Flash ✔️Gyro ✔️Accelerometer ✔️ Onboard OSD Not Tested as on DJI but puts our voltage to goggles. Slight oscillations but thinks it needs tweak.
thank you. correct, tuning is a pilot chore separate from target-definition.