examples/l3-load-latency get no packet on RX port

[missyoyo]

Hello: I not sure I do this correctly. I have MoonGen with 2 intel X710 bind to DPDK, Port 1(SRC_IP_BASE=10.0.0.10) connect to my router port 0 (10.0.0.100) and port 1 (DST_IP = "10.1.0.10") connect to my route port1 (10.1.0.100) and change LUA content(local GW_IP = "10.0.0.100") RUN like this ./build/MoonGen examples/l3-load-latency.lua 0 1 I get nothing on Moongen Port 1 [Device: id=0] TX: 5.51 Mpps, 2823 Mbit/s (3706 Mbit/s with framing) [Device: id=1] RX: 0.00 Mpps, 0 Mbit/s (0 Mbit/s with framing) [Device: id=0] TX: 5.78 Mpps, 2958 Mbit/s (3882 Mbit/s with framing) [Device: id=1] RX: 0.00 Mpps, 0 Mbit/s (0 Mbit/s with framing) [Device: id=0] TX: 5.65 Mpps, 2893 Mbit/s (3798 Mbit/s with framing) [Device: id=1] RX: 0.00 Mpps, 0 Mbit/s (0 Mbit/s with framing) [Device: id=0] TX: 5.57 Mpps, 2850 Mbit/s (3740 Mbit/s with framing) [Device: id=1] RX: 0.00 Mpps, 0 Mbit/s (0 Mbit/s with framing) [Device: id=0] TX: 5.57 Mpps, 2854 Mbit/s (3746 Mbit/s with framing) [Device: id=1] RX: 0.00 Mpps, 0 Mbit/s (0 Mbit/s with framing) ^C[Device: id=0] TX: 5.46 (StdDev 0.23) Mpps, 2793 (StdDev 119) Mbit/s (3666 Mbit/s with framing), total 68907795 packets with 4410114744 bytes (incl. CRC) [Device: id=1] RX: 0.00 (StdDev 0.00) Mpps, 0 (StdDev 0) Mbit/s (0 Mbit/s with framing), total 1 packets with 64 bytes (incl. CRC) Samples: 43, Average: 1428321.0 ns, StdDev: 3643238.3 ns, Quartiles: 67256.0/70896.0/223781.0 ns

But my route can see packet already send to Moongen Port 1: And packet DST MACADDRESS is good. Some thing wrong???