Navio-SDK-Windows-IoT

Navio-SDK-Windows-IoT copied to clipboard

RCIO (Navio 2 PWM, ADC, SBUS & PPM Coprocessor) Hardware Support

3

As this chip is connected to the second SPI bus, work will first have to be done to enable this access because the current MS IoT SDK only provides access...

CodeChief

Re-Write Hardware Library as C++ Windows Runtime Component with Drivers

8

After the RC Input proof of concept it was identified that user mode code is too slow for real time devices and all possibilities to use higher priority tasks are...

CodeChief

RC Input (Navio1 Software PPM over GPIO) Hardware Support

9

Add support for the RC Input via GPIO. First version supports CPPM same as Linux but prepare for potential SBUS protocol support.

CodeChief

IMU (MPU9250) Hardware Support

2

Device, sample and test app.

CodeChief

GPS (U-Blox NEO) Hardware Support

1

Device, sample and test app. Minimum support is current Navio+ NEO-MN8 model but attempt to support Navio (original) NEO7M and NEO-6T dongle if the UBLOX hardware is standardized (likely as...

CodeChief

ADC (ADS1115) Hardware Support

1

Device, sample and test app.

CodeChief

Support FrSky SPort connection via serial port for both telemetry and RC input. Potentially saving lots of wasted CPU time otherwise required to perform the DSP functionality of PWM decoding...

CodeChief