L2Bot 4.0 version

1. INTRODUCTION

L2Bot is toolkit of AutoIt scripts to implement Lineage 2 bot.

2. INSTALLATION

You need to download AutoIt interpreter from official website for launching L2Bot : http://www.autoitscript.com/site/autoit/downloads

The x64 interpreter version must be selected in installation dialog for users with x64 Windows version.

Then download archive with L2Bot scripts and extract it: https://github.com/ellysh/l2bot/archive/master.zip

3. CONFIGURATION

NB: You must set the chat with Enter checkbox in your Lineage client application for the correct bot's working.

Configuration of the L2Bot consist of the three stages:

1. Configuration of the bot according to your Lineage client's interface.
2. Configuration of the mob's names to attack them by bot.
3. Configuration of the hotbar keys according your character's class.

All these stages will be described below.

3.1 INTERFACE CONFIGURATION

You can use the configurator_en.au3 script from the run directory to configure farm bot according your Lineage client's interface. All interface's parameters will be saved in interface.au3 file from the conf directory.

There are steps to perform the interface configuration:

1. Run your Lineage client in the window mode. You can press Alt+Enter for switching to the window mode.
2. Resize the Lineage client window to full screen with mouse.
3. Get into the game with your character.
4. Run configurator_en.au3 script from the run directory.
5. Switch to the Lineage client window.
6. Press Alt+F2 to start configuration script.
7. Select the point in the Lineage window according the information in popup tip. You can select point at the current cursor's position by pressing Alt+F3.
8. The popup tips will be disappeared after you has selected the last point. Configuration is complete.

This is illustration of all configuration points in the interface_conf.jpg file from the images directory.

You can use the configurator_fishing_en.au3 script from the run directory to configure fishing bot. This script works like the described above configurator_en.au3 one. This is illustration of all configuration points for fishing bot in the fishing_conf.jpg file from the images directory.

3.2 MOB'S NAMES CONFIGURATION

There are steps to perform the mob's names configuration:

1. Open the targets.au3 fle from the conf directory with any text editor.
2. Write mob's names into $kTargetNames list.
3. Change value of the $kTargetCount variable according count of elements in the $kTargetNames list.

NB: You can specify one or two letters of the mob's names for the Gracia Final and above Lineage chronicles. This is example: global const $kTargetNames = "G,Wo"

You must specify full mob's names for Lineage chronicles below the Gracia Final one: global const $kTargetNames = "Gremlin,Wolf"

3.3 HOTBAR KEYS CONFIGURATION

The L2Bot scripts implement the farm bots for several character's classes. All these scripts are placed to the run directory. Script's name is the same as relevant class's name.

The hotbar configuration is depended on the running script. You can use hotbar illustrations from the images directory. Name of the illustration file contains the character's class name and the hotbar word. For example, bladedancer_hotbar.jpg file is the illustration for bladedancer.au3 script.

The fishing_hotbar.jpg file from the images directory is a hotbar illustration for the fishing bot.

4. LAUNCHING

NB: Bots of L2Bot project is not executable exe files! All bots are implemented as AutoIt scripts with au3 extention and them are placed to the run directory. You can run these scripts like the exe files.

There are steps to run L2Bot:

1. Run your Lineage client in the window mode. You can press Alt+Enter for switching to the window mode.
2. Resize the Lineage client window to full screen with mouse.
3. Get into the game with your character.
4. Run one of the farm-bot script from the run directory.
5. Switch to the Lineage client window.
6. Press Alt+F2 to start bot.
7. You can stop bot by Alt+F1 pressing.

NB: The Lineage client window must have the same size and position as you have configured (see the 3.1 section).

5. FISHING BOT

Fishing bot is implemented in the runnable fishing.au3 script file from run directory.

Configuration of the fishing bot consist of the two stages:

1. Configuration of the bot according to your Lineage client's interface (see the 3.1 section).
2. Configuration of the hotbar keys (see the 3.3 section).

NB: You must set the attack skill to F1 key for the nuker classes instead the Attack action

You must perform these actions before run the fishing bot:

1. Place your character near the water where you can use Fishing skill. Character and camera must be faced to the water i.e. the character will move to the water if you will press the Up arrow keyboard button.
2. Wear the fishrod and bait on your character.

You can run and stop fishing bot with the same buttons as the others bots.

6. CHAT BOT

Chat bot is implemented in the runnable chat.au3 script file from the run directory.

You can open the chat.au3 file from the run directory and specify variables described below to configure bot: kMessageTextRus - this is message text to print in Russian language. kMessageTextEn - this is message text to print in English language. kDelayMinutes - this is delay betweeen the message outputs in minutes.

You can run and stop chat bot with the same buttons as the others bots.

7. CUSTOM SCRIPT

The custom script mechanism allow you to extend the functionality of existing farm bots. Also you can create custom script that will be launched separately from the other L2Bot scripts.

There are steps to perform the custom script generation:

1. Run script_generator.au3 file from the run directory.
2. Press Alt+F2 to start generator script.
3. Perform the keys pressing and mouse clicks that will be saved.
4. Press Alt+F1 to complete the generator script

NB: The generator script is able to save letters, numbers, F1-F12 buttons and left button mouse clicks. The buttons Alt, Ctrl, Shift and Win will not be saved.

The generated custom script has been saved in the script.au3 file in the run directory.

There are steps to launch custom script:

1. Run script_run.au3 file from the run directory.
2. Press Alt+F2 to start custom script.
3. You can interrupt the custom script's work by Alt+F1 pressing

NB: You can launch custom script in the loop. Change the kIsLoop variable to true in the script_run.au3 file: global const $kIsLoop = true

All farm bots will launch custom script by timeout. You can change timeout value with the kTimeouts variable in the running farm bot script.

8. REPEATER SCRIPT

Two kind of repeater script are available:

1. Repeater script for farm bot that will control several Lineage windows.

This kind of repeater script have been moved to separate project: https://github.com/ellysh/repeater

2. Repeater script for manually controlling several Lineage windows.

There are steps to run repeater script:

1. Launch file repeater.au3 in run directory.

2. Open all Lineage windows that will be controlled by script.

3. Switch to any Lineage client window.

4. Press Alt+F2 to start script.

5. You can stop script by Alt+F1 pressing.

6. ROULETTE BOT

Roullete bot allow you to automate roulette play at the asterios.tm servers x3 and x7.

There are steps to perform the bot's configuration:

1. Run configurator_roulette.au3 script from the run directory.
2. Switch to the Lineage client window.
3. Press Alt+F2 to start configuration script.
4. Select the point in the Lineage window according the information in popup tip. You can select point at the current cursor's position by pressing Alt+F3.
5. The popup tips will be disappeared after you has selected the last point. Configuration is complete.

You can open the roulette.au3 file from the run directory and specify variables described below for additional bot's configuration: kStartRate - start rate. kMaxRate - maximum allowable rate.

There are steps to launch rullete bot:

1. Run roulette.au3 file from the run directory.

2. Switch to the Lineage client window.

3. Press Alt+F2 to start bot.

4. You can interrupt the script's work by Alt+F1 pressing

5. CONTACTS

You can ask any questions about usage L2Bot, report about bugs, send your suggestions and patches in the L2Bot project's groups and the developer's email.

Developer: Ilya Shpigor [email protected]

Project's group in vk: https://vk.com/l2bot

Project's group in facebook: https://www.facebook.com/L2Bot