firmware
firmware copied to clipboard
electraone
Electra One base firmware
# 💡 RESTORED: Display Brightness Control for Electra One MK1 HW 2.40 v3.5.4 ## Overview The display brightness control feature that was available in firmware v2.0 but dropped in later...
When a page change is issued via sysex sometimes the hardware buttons become inactive or the device freezes completely. Note: You can make them work again if you long press...
Allow knobs to send relative values. Since the encoding of relative values is already available in the editor, a switch to choose between absolute/relative should be sufficient. If the knobs...
Since there is enough space both could be put on the same screen for easier access.
Currently, the ID of an element needs to be known to update its' parameters. This is problematic since these IDs tend to be not stable, e.g. if the order of...
Currently, the whole preset list needs to be retrieved from the device to find the index of a preset to select. This requires currently 2 asynchroneous messages which are a...
VU meters are pretty helpful to see playback activity of the channels in a DAW. This could be done as a variant of a group header. Here is a rough...