uBlock-Safari
uBlock-Safari copied to clipboard
el1t
Explanation of the state of uBlock Origin (and other blockers) for Safari
Very quick tl;dr: uBO will no longer work with Safari, use Firefox or a new "content blocker" app (see below for good replacements).
In the past few months, and especially in the past week, there have been a lot of posts and comments questioning the status of uBlock Origin for Safari. This should answer all questions on the status of uBO for safari.
uBlock Origin was ported for Safari in 2016, and was updated regulary (mostly changes from the main project) until 2018 when development completley stopped. Since then Apple has begun phasing out Safari extensions as extensions, and has instead been implenting a new extensions framework which is extremley limited in adblocking functions, only allowing "content blockers", which are just links bundled as an app which Safari enforces. From Safari 12 / macOS Mojave, old legacy Safari extensions were still allowed, but came with warnings saying that they will slow down your browsing (they infact won't, or at least not noticably). Safari also recently shut their Extension Gallery, instead redirecting it to the mac app store. Though it is still curently possible to install uBlock Origin by downloading the extension from Github (edit: must follow these instructions, it will not be starting from Safari 13 / macOS Catalina, when the legacy entension API will be fully deprecated.
It will not possible for uBlock Origin to work with the upcoming Safari 13 / macOS Catalina release If you are a current user of uBlock Origin for Safari here are the options to continue blocking ads:
- For the moment continue to use Safari 12 with uBlockOrigin. Anybody with uBO currently installed, it won't be removed until you update to Safari 13. If you don't have uBO installed, and wish to install on a pre-Catalina version of Safari, Download the latest (and final) release here and follow these instructions to install it. Unfortunately it's a bit complicated. This will stop working with macOS Catalina (coming "this fall"). Update: It appears that it is not possible to install uBO permanently, it will always uninstall on a restart of Safari. If you have it, it should stay.
- Switch to a different browser. If you choose this, I strongly recomend Firefox. Chrome will itself be ending support for uBlockOrigin soon. If battery life is an issue for you get Firefox Beta, Nightly or Developer which has massive battery life improvements to bring it on par with Safari / Chrome being tested (note: somewhat unstable). This will come to the stable version, hopefully in time for uBO-Safari's eol.
- Get a content blocker. Not nearly as powerful as uBO, but the best option if you want to stay with Safari. Do not get the app called "uBlock", this is unassociated with uBlockOrigin (read about the split here), and is simply a content blocker with a big negative feature of having acceptable ads built in (which is AdBlockPlus's pay-to-play ad and tracker unblocking program). It shares no code with uBO and has no advantages over any other content blocking app. Here are some recomendations of content blockers:
Top picks
- Adguard for Safari, very good blocking and free. Very customisable. Doesnt always have the best performance (though this has apparently been fixed). AdGuard's performance is quite controversial, read discussion [here].(https://github.com/el1t/uBlock-Safari/issues/158#issuecomment-533546184). AdGuard also uses the same lists and filter syntax as uBO, making migration easier. ~~- 1Blocker, by far the most powerful, with custom rules and an element picker. This is the best option if you don't mind paying. Costs $10. ~~Update: do not buy. 1Blocker has teased 1BlockerX for Mac, which will be a paid upgrade. I cannot reccomend buying an app now which will soon be obsolete..~~ Update 2: 1Blocker has said that it will be a free upgrade to 1BlockerX from the current version, so there isn't any reason to wait if you want it.~~ 1Blocker has switched to a subscription model, even for people who already paid for it. Avoid.
- Ka-block. Unexceptional. Free. Will block ads, nothing more. Pretty sure it's just a wrapper for easylist, but it's a good option if you mind paying for 1Blocker. Also open-source.
Other Good Options
- Ghostery Lite. Free. Ghostery. Some advanced options for whitelisting. Good lists for ad and tracker blocking.
- Adguard for Mac. Fully featured system wide adblocker, contains custom lists and element picker. Does cost after a trial, see here for prices.
- Wipr. $1.99, simple featureless and popular. ~~Don't see any advantage in this over Ka-block (see above) for an extra $1.99.~~ Apparently Ka-Block doesn't work for youtube (wipr does), and Wipr uses 3 extensions to get around the limit in rules.
Do Not Reccomend
- AdBlock Plus for Safari - Supports acceptable ads, a pay-to-play ad allowing system which allows certain ads and trackers which meet guidelines and pay AdBlock Plus. Some of these ads, imo, are not acceptable, and I don't consider any trackers acceptable. Uses Easylist so otherwise is identical to Ka-Block!.
- uBlock - Don't at all associated with uBO or the code which uBO contains. Is instead identical to AdBlock Plus in all but name including acceptable ads.
- AdBlock for Safari (made by BETAFISH INC) - Yet another acceptable ads-supporting blocker which just uses easylist. Avoid.
- There are plenty more on the mac app store, have a look if none of these suit. No new content blockers can spy on you as they send lists though Safari's built in system, so they are all pretty safe. If you find a good one comment and I'll add it to this list.
Update: Here is a statement from gorhill (uBO developer) on the state of Safari
Edit: a lot people are asking about uBlock Origin not working in the future on Chrome. If you'd like more information on this, here is an article from ghacks from january, and a statement from gorhill, developer of uBlock.**
There has been discussion of this on Reddit Github and Hacker News.
What differentiates an "ad-blocker" from a "content-blocker" that makes it impossible for this change? Isn't an "ad-blocker" just a "content-blocker" that only blocks a very specific type of content?
thanks for u summation. it's so sad:( i have used it for three years and it's time to say goodbye...
What differentiates an "ad-blocker" from a "content-blocker" that makes it impossible for this change? Isn't an "ad-blocker" just a "content-blocker" that only blocks a very specific type of content?
I must admit the the terminology isn't very clear. A Safari "content-blocker" app sends a list to Safari, and Safari blocks it. A regular blocker (like uBO) blocks content itself. Safari content blockers aren't all bad, they are more secure in that they can't possibly collect your browsing history (not that uBO does), but lack the level of customisation and power that a regular blocker like uBO can provide.
Just FIY I would not recommend buying 1Blocker. I paid both for the initial version and the "1Blocker X" one on IOS but I had the constant feeling the filter lists weren't being updated and I wasn't sure of their origin (I'm assuming they use EasyList for the ads, but which one do they use for privacy & annoyances?).
AdGuard for Safari is free, open-source and is compatible with uBlock-style filter lists (it has code that does its best to convert them to Safari content blocking lists). You can choose to use EasyList, EasyPrivacy, Fanboy's lists or any of the regional lists so I would recommend it over 1Blocker.
Adguard for Safari, the most effective, but contains electron (chromium). I'm not entirely sure how it works, but it will cost performance and battery life on your computer so I would avoid it.
- Electron is used for the UI part of it only. All other parts are native.
- Running the electron part in the background is not necessary. Although, it is recommended so that AG could update filters automatically.
- The linked issue was resolved in the latest release
I'm not entirely sure how it works
You can take a look - https://github.com/AdguardTeam/AdGuardForSafari
Adguard for Safari, the most effective, but contains electron (chromium). I'm not entirely sure how it works, but it will cost performance and battery life on your computer so I would avoid it.
1. Electron is used for the UI part of it only. All other parts are native. 2. Running the electron part in the background is not necessary. Although, it is recommended so that AG could update filters automatically. 3. The linked issue was [resolved](https://github.com/AdguardTeam/AdGuardForSafari/issues/210) in the latest releaseI'm not entirely sure how it works
You can take a look - https://github.com/AdguardTeam/AdGuardForSafari
Thank you for responding. Ive updated the post and corrected my errors.
Based on point 2, for filters to update, the electron part needs to be running. Does leaving this running for filters to update have any serious power or performance issues?
Just FIY I would not recommend buying 1Blocker. I paid both for the initial version and the "1Blocker X" one on IOS but I had the constant feeling the filter lists weren't being updated and I wasn't sure of their origin (I'm assuming they use EasyList for the ads, but which one do they use for privacy & annoyances?).
AdGuard for Safari is free, open-source and is compatible with uBlock-style filter lists (it has code that does its best to convert them to Safari content blocking lists). You can choose to use EasyList, EasyPrivacy, Fanboy's lists or any of the regional lists so I would recommend it over 1Blocker.
thats odd, when I wrote this post, everything I could find had it as the best or one of the best. This guy tested them quite thoroughly from 2015 to 2018, and found 1Blocker to stand out. Looking at it again now, it seems that 1Blocker requires an app update to update their lists (entirely based on the changelog), which would explain the slow rate of updates. Tommorow I will investigate further and update my list once again.
Based on point 2, for filters to update, the electron part needs to be running. Does leaving this running for filters to update have any serious power or performance issues?
Not really. Here's how it looks on my MBP, and in my case, I am actually actively using it, not just keep it in the background:
There was indeed an issue with the version of Electron we were using previously, but it's now gone.
On the other hand, I share your sentiments about Electron. The UI is generally worse and slower than it could be if we made it native. But it allowed reusing a lot of existing code from the Chrome/FF extensions so here we are.
AdGuard is SLOOOOOOOOW. Horrible piece of software. Typical of garbage created with Electron.
On Sep 20, 2019, at 7:48 AM, Andre Borie [email protected] wrote:
Just FIY I would not recommend buying 1Blocker. I paid both for the initial version and the "1Blocker X" one on IOS but I had the constant feeling the filter lists weren't being updated and I wasn't sure of their origin (I'm assuming they use EasyList for the ads, but which one do they use for privacy & annoyances?).
AdGuard for Safari is free, open-source and is compatible with uBlock-style filter lists (it has code that does its best to convert them to Safari content blocking lists). You can choose to use EasyList, EasyPrivacy, Fanboy's lists or any of the regional lists so I would recommend it over 1Blocker.
— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/el1t/uBlock-Safari/issues/158?email_source=notifications&email_token=ABG2XK6YVNHD3TOMSJCNLA3QKS2BJA5CNFSM4IUSZ4XKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOD7GOCOQ#issuecomment-533520698, or mute the thread https://github.com/notifications/unsubscribe-auth/ABG2XK75SB54BJJIQT2KCTTQKS2BJANCNFSM4IUSZ4XA.
For anyone claiming AdGuard is “fine”…
When you first click on the AdGuard toolbar button you get this:
Click on the Run button and you have to wait 8 seconds for this monstrosity to load:
Close that eyesore and go back to Safari. Clock on the AdGuard button again and it always takes a full 2 seconds for the following pop-up to appear:
And of course then you have to go through a multi-step process for selecting a screen element on the page, experimenting with the slider, previewing, and then saving your change. Nothing responds to keyboard commands like hitting the Escape button because of course it doesn’t.
On Sep 20, 2019, at 9:37 AM, Walter A [email protected] wrote:
AdGuard is SLOOOOOOOOW. Horrible piece of software. Typical of garbage created with Electron.
On Sep 20, 2019, at 7:48 AM, Andre Borie <[email protected] mailto:[email protected]> wrote:
Just FIY I would not recommend buying 1Blocker. I paid both for the initial version and the "1Blocker X" one on IOS but I had the constant feeling the filter lists weren't being updated and I wasn't sure of their origin (I'm assuming they use EasyList for the ads, but which one do they use for privacy & annoyances?).
AdGuard for Safari is free, open-source and is compatible with uBlock-style filter lists (it has code that does its best to convert them to Safari content blocking lists). You can choose to use EasyList, EasyPrivacy, Fanboy's lists or any of the regional lists so I would recommend it over 1Blocker.
— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/el1t/uBlock-Safari/issues/158?email_source=notifications&email_token=ABG2XK6YVNHD3TOMSJCNLA3QKS2BJA5CNFSM4IUSZ4XKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOD7GOCOQ#issuecomment-533520698, or mute the thread https://github.com/notifications/unsubscribe-auth/ABG2XK75SB54BJJIQT2KCTTQKS2BJANCNFSM4IUSZ4XA.
What about building uBlockOrigin as either a proxy with a root certificate or using applescript and making it a Mac app?
Further options are being discussed in uBlockOrigin/uBlock-issues#145.
@p4t44, you may want to link to the HackerNews discussion of the whys and pros and cons of Apple's change to Safari: https://news.ycombinator.com/item?id=21025252
Based on point 2, for filters to update, the electron part needs to be running. Does leaving this running for filters to update have any serious power or performance issues?
Not really. Here's how it looks on my MBP, and in my case, I am actually actively using it, not just keep it in the background:
There was indeed an issue with the version of Electron we were using previously, but it's now gone.
On the other hand, I share your sentiments about Electron. The UI is generally worse and slower than it could be if we made it native. But it allowed reusing a lot of existing code from the Chrome/FF extensions so here we are.
As AdGuard's performance is far from settled, I've linked here. If it goes fast for you, use it. If it goes slow for you, don't use and delete it.
Just FYI for anyone reading this thread: AdGuard for Mac requires installing a kernel extension which as far as I know none of the other options do. I didn't feel comfortable with that so I went with one of the other options.
I would also suggest Little Snitch or some free equivalent, using block lists. Since it's a firewall, it won't be impacted by any changes in Safari.
I was using a manually installed build of uBlock Origin on Safari, but Safari crashed twice, and uBlock was dissabled.
@p4t44 @freediverx Do you need nifty macos app or just good ad blocker ? You don't need to run it. Electron app i needed only for rule updates. It can't slow down your safari browser. So i think slowness of this app it's not critical issue. You can run it from time to time just for update rules.
@El-Fitz but functionality of this ad blocker will be limited to blocking hosts when real ad blockers much more powerful and it will diffidently slow down your browser. Better use dnscrypt-proxy with blocklist in this case if you could satisfied by host blockers.
@p4t44
As AdGuard's performance is far from settled, I've linked here. If it goes fast for you, use it. If it goes slow for you, don't use and delete it.
Why? It seems settled that the UI is slow as it's Electron-based, and I don't argue with that. It just has nothing to do with ad blocking performance, and there's no one on this thread complaining about that. Also, "slow" does not mean that it consumes additional energy or whatever. It simply takes more time to render when you decide to use it.
Just wanted to leave this here: https://thehackernews.com/2019/09/browser-chrome-extension-adblock.html
@p4t44
As AdGuard's performance is far from settled, I've linked here. If it goes fast for you, use it. If it goes slow for you, don't use and delete it.
Why? It seems settled that the UI is slow as it's Electron-based, and I don't argue with that. It just has nothing to do with ad blocking performance, and there's no one on this thread complaining about that. Also, "slow" does not mean that it consumes additional energy or whatever. It simply takes more time to render when you decide to use it.
It used to be that it was slower even without the UI open before a recent update. It is also reccomended that you leave the app open constantly for filters to update (which or may not slow it down). I can link you to a dozen reports of AdGuard going slow, so I think it is unreasonable not to mention it in the list.
Slow means that 1) it takes longer to use, 2) uses excessive CPU and memory to make the rest of your computer go slower and 3) use more battery. I'm really not sure wether it is significantly slower then alternatives, and I don't have the time or will to figure it out. I've linked to this thread so anybody unsure can read the comments of the AdGuard developer and decide for himself.
I think that if you are considering AdGuard, download it. Check activity monitor, if it takes up a lot of CPU or battery, uninstall and get something else. If it doesn't, then don't and use it.
I would just like to mention a couple of advantages that Wipr has over Ka-Block:
- Wipr works with YouTube, while Ka-Block doesn't
- Wipr is actually made of 3 extensions in order to be able to overcome the 50k rules limitation imposed by Apple, so it can go up to 150k and block more stuff (Ka-Block can fail to block ads on some websites in my experience)
- I don't know if Ka-Block can do this, but Wipr can automatically update the filter list in background without having the app up and running all the time.
Note that with the new Content Block API you don't need to have a white-list option built into the extension, because you can exclude content blocking on specific websites directly from Safari going to Preferences -> Websites -> Content Blockers
I would just like to mention a couple of advantages that Wipr has over Ka-Block:
* Wipr works with YouTube, while Ka-Block doesn't * Wipr is actually made of 3 extensions in order to be able to overcome the 50k rules limitation imposed by Apple, so it can go up to 150k and block more stuff (Ka-Block can fail to block ads on some websites in my experience) * I don't know if Ka-Block can do this, but Wipr can automatically update the filter list in background without having the app up and running all the time.Note that with the new Content Block API you don't need to have a white-list option built into the extension, because you can exclude content blocking on specific websites directly from Safari going to Preferences -> Websites -> Content Blockers
Updated the post.
@kfur true; it doesn't offer the same level of ad blocking. But how would it slow down the browser? It doesn't run in it, and the requests just fail before even leaving the computer
@El-Fitz i think LS was developed not for it. I assume that software like dnscrypt-proxy or system host file will work faster.