Monolinux Raspberry Pi 3

A Monolinux distro for Raspberry Pi 3!

Monolinux: https://github.com/eerimoq/monolinux

Features

• Fast development cylce (a matter of seconds from source code change to entering user space).

• Everything the Linux kernel provides (networking, filesystems, drivers, etc).

• Various libraries provided by Monolinux_.

Limitations

• Networking does not yet work.

Build and run

One time setup

Build a Raspberry Pi 3 image using Buildroot, insert an SD card into the PC and write the image to it.

.. code-block:: shell

$ cd .. $ git clone https://github.com/buildroot/buildroot.git $ cd buildroot $ make raspberrypi3_defconfig $ make $ sudo dd if=output/images/sdcard.img of=/dev/sdX $ cd monolinux-raspberry-pi-3

Open /media/X/config.txt and replace #initramfs rootfs.cpio.gz to initramfs initramfs.cpio.

Daily development

Build this project and copy the kernel and ramdisk to the SD card, overwriting the existing files with the same name.

.. code-block:: shell

$ ./rundocker.sh $ make -s -j8 $ exit $ cp app/build/initramfs.cpio /media/X $ cp app/build/linux/arch/arm/boot/zImage /media/X $ sync

Now insert the SD card into your Raspberry Pi 3 and power it up. The console is on the serial port on the P1 header.

.. _Monolinux: https://github.com/eerimoq/monolinux