Edward Firmo

> BTW is there any way I can flash back to ewelink software? I cant find the original firmware anywhere. I've never tried that, but there is: https://github.com/Blackymas/NSPanel_HA_Blueprint/issues/972#issuecomment-1673164989

Can you connect to your panel to get ESPHome logs? If so, please share some here.

You can add `captive_portal:` to your panel's yaml, but you will have to connect to your panel to install this anyways. 😞

If ESPHome can't connect to WiFi, it shook ukd expose an wifi fallback AP with your panel's name, but if it is connecting, you shoukd be able to see it's...

> When the panel connect to the WIFI, it get instantly picked up by HA integration That means your panel is connected to WiFi. A long press on the time...

So, the panel is not connecting to Home Assistant then? Ok. So, I can only suggest you to flash via serial in this case. 😞

Time display is already optional, so make this optional date display is not that hard, however the Nextion display imposes some limitations and the position of time would be moved...

> Do I have to long press the reset button on the panel before start flash the firmware? No, that is not needed. How is your panel's yaml now?

It's easier to just copy the format from the home page. 😉 I don't think the format is the issue. we can always adjust the font size. It's more about...

Are you connecting IO0 to GND? That should be sufficient to put the board on flashing mode. What you see in the screen is not very important when you are...