edorfaus
TEMPerHumM12V1.2 0C45:7402
Made by PCsensor (http://www.pcsensor.com/index.php?_a=document&doc_id=6), metallic enclosure with blue TXT push button and titled "TEMPerHUM", windows driver TEMPer V24.4.4.zip. It seems to be (I didn't opened enclosure) that used Silabs Si7006 sensor - http://www.silabs.com/Support%20Documents/TechnicalDocs/Si7006-A10.pdf Following request bytes - .data = (unsigned char[]){ 0, 1, 0x80, 0x33, 1, 0, 0, 0, 0 }
hid-query /dev/hidraw1 1 0x80 0x33 1 Device /dev/hidraw1 : 0c45:7402 interface 1 : RDing TEMPERHUM1V1.2 Writing data (9 bytes): 00 01 80 33 01 00 00 00 00 Response from device (8 bytes): 80 04 6b 80 43 32 2e 32 where - 80 04 and 2e 32 - technical (not interesting for me at least, please add info if matters) 6b 80 - temperature 43 32 - humidity
from sensor description - _tempC = ((float)temp)_175.72 / 65536-46.8; float relhum = ((float)rh)*125 / 65536 - 6;
lsusb -v output Bus 002 Device 015: ID 0c45:7402 Microdia Couldn't open device, some information will be missing Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x0c45 Microdia idProduct 0x7402 bcdDevice 0.01 iManufacturer 1 iProduct 2 iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 59 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xa0 (Bus Powered) Remote Wakeup MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 1 Boot Interface Subclass bInterfaceProtocol 1 Keyboard iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.10 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 65 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 10 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 1 Boot Interface Subclass bInterfaceProtocol 2 Mouse iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.10 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 41 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 10
@G0lph3r Hey, man, did you manage to get it working? I'm currently trying to make it work according to another issue post from ourmoonflass. If I manage to get it working I'll let you know.
P.S: I have the exact same model you do
Yeah, working like a clock on Udoo board. Little bit modified source for myself also if interested I can post. IMHO integration with openHAB is weird = through SNMP, but maybe it's Ok, cause I'm not linux guru. Happy New Year!
In temper_type.c I modified:
snip .get_subtype_data = &(struct tempered_type_hid_subtype_from_string_data) { .query = { .length = 9, .data = (unsigned char[]){ 0, 1, 0x86, 0xFF, 1, 0, 0, 0, 0 } }, .response_count = 2, .subtype_strings = (char *[]){ "TEMPerHumV1.0rHu", "TEMPerHumM12V1.0", "TEMPerHumM12V1.2", NULL } }, ...
and added a struct: (struct temper_subtype*)&(struct temper_subtype_hid){ .base = { .id = 2, .name = "TEMPerHum2V1.2", .open = tempered_type_hid_subtype_open, .read_sensors = tempered_type_hid_read_sensors, .get_temperature = tempered_type_hid_get_temperature, .get_humidity = tempered_type_hid_get_humidity }, .sensor_group_count = 1, .sensor_groups = (struct tempered_type_hid_sensor_group[]){ { .query = { .length = 9, .data = (unsigned char[]){ 0, 1, 0x80, 0x33, 1, 0, 0, 0, 0 } }, .read_sensors = tempered_type_hid_read_sensor_group, .sensor_count = 1, .sensors = (struct tempered_type_hid_sensor[]){ { .get_temperature = tempered_type_hid_get_temperature_si7006, .get_humidity = tempered_type_hid_get_humidity_si7006, .temperature_high_byte_offset = 2, .temperature_low_byte_offset = 3, .humidity_high_byte_offset = 4, .humidity_low_byte_offset = 5 } } } } },
then i copied the si7005.c and si7005.h and adapted a bit...
#include <stdbool.h> #include <string.h>
#include "type-info.h" #include "../tempered-internal.h"
bool tempered_type_hid_get_temperature_si7006( tempered_device *device, struct tempered_type_hid_sensor *sensor, struct tempered_type_hid_query_result *group_data, float *tempC ) { if ( group_data->length <= sensor->temperature_high_byte_offset || group_data->length <= sensor->temperature_low_byte_offset ) { tempered_set_error( device, strdup( "Not enough data was read from the sensor." ) ); return false; }
// Convert from two separate data bytes to a single integer.
// The result should be an unsigned int between 0x0000 and 0xFFFF.
int low_byte_offset = sensor->temperature_low_byte_offset;
int high_byte_offset = sensor->temperature_high_byte_offset;
int temp = ( group_data->data[low_byte_offset] & 0xFF )
+ ( ( group_data->data[high_byte_offset] & 0xFF ) << 8 )
;
// According to the Silicon Labs Si7006 datasheet,
*tempC = ((float)temp) * 175.72 / 65536 - 46.8; // Seen in the Datasheet
// my custom values ... *tempC = ((float)temp) * 175.72 / 65536 - 48;
return true;
}
bool tempered_type_hid_get_humidity_si7006( tempered_device *device, struct tempered_type_hid_sensor *sensor, struct tempered_type_hid_query_result *group_data, float *rel_hum ) { float tempC; if ( !tempered_type_hid_get_temperature_si7006( device, sensor, group_data, &tempC ) ) { return false; }
if (
group_data->length <= sensor->humidity_high_byte_offset ||
group_data->length <= sensor->humidity_low_byte_offset
)
{
tempered_set_error(
device, strdup( "Not enough data was read from the sensor." )
);
return false;
}
int low_byte_offset = sensor->humidity_low_byte_offset;
int high_byte_offset = sensor->humidity_high_byte_offset;
int rh = ( group_data->data[low_byte_offset] & 0xFF )
+ ( ( group_data->data[high_byte_offset] & 0xFF ) << 8 )
;
// These formulas and values are based on the Silicon Labs Si7005 datasheet
// There's 16 codes per %RH, with 0x0000 = -24%RH
// float relhum = ((float)rh) / 16 - 24;
float relhum = ((float)rh)*125 / 65536 - 6;
// Linearization
// relhum -= -0.00393 * relhum * relhum + 0.4008 * relhum - 4.7844;
// Temperature compensation
// relhum += ( tempC - 30 ) * ( 0.00237 * relhum + 0.1973 );
*rel_hum = relhum;
return true;
}
Thanks! I'm currently updating the make files to try Diggensag's code; but @G0lph3r if you could upload a fork or the code you used to compile it/ make it work that would awesome! Because I'm kind of on a deadline
Sorry didn't have private Github, so posting changes vs this project source. My aim was "it working for me, let's forget", so code must be definitely better and IMHO Diggensag wrote it already here. Just search and replace. If you give mail address will send directly to you zipped project. temper_type.c ***** My changes "TEMPerHumV1.0rHu", "TEMPerHumM12V1.2", NULL ***** Source code taken from this github fork "TEMPerHumV1.0rHu", "TEMPerHumM12V1.0", NULL
***** My changes .id = 1, .name = "TEMPerHumM12V1.2", .open = tempered_type_hid_subtype_open, ***** Source code taken from this github fork .id = 1, .name = "TEMPerHumM12V1.0", .open = tempered_type_hid_subtype_open,
tempered.c ***** My changes printf( "%.2f\n" "%.1f\n", tempC, rel_hum ); } else if ( type & TEMPERED_SENSOR_TYPE_TEMPERATURE ) { printf( "%s %i: temperature %.2f %s\n", tempered_get_device_path( device ), sensor, ***** Source file taked from here printf( "%s %i: temperature %.2f %s" ", relative humidity %.1f%%" ", dew point %.1f %s\n", tempered_get_device_path( device ), sensor,
***** My changes options->temp_scale->from_celsius( tempC ), options->temp_scale->symbol ***** Source file taked from here options->temp_scale->from_celsius( tempC ), options->temp_scale->symbol, rel_hum, options->temp_scale->from_celsius( tempered_util__get_dew_point( tempC, rel_hum ) ), options->temp_scale->symbol
***** My changes } else if ( type & TEMPERED_SENSOR_TYPE_HUMIDITY ) { ***** Source file taked from here } else if ( type & TEMPERED_SENSOR_TYPE_TEMPERATURE ) {
***** My changes printf( "%s %i: relative humidity %.1f%%\n", tempered_get_device_path( device ), sensor, rel_hum ); ***** Source file taked from here printf( "%s %i: temperature %.2f %s\n", tempered_get_device_path( device ), sensor, options->temp_scale->from_celsius( tempC ), options->temp_scale->symbol );
***** My changes } else { ***** Source file taked from here } else if ( type & TEMPERED_SENSOR_TYPE_HUMIDITY ) {
***** My changes printf( "%s %i: no sensor data available\n", tempered_get_device_path( device ), sensor ); ***** Source file taked from here printf( "%s %i: relative humidity %.1f%%\n", tempered_get_device_path( device ), sensor, rel_hum );
***** My changes } } ***** Source file taked from here } else { printf( "%s %i: no sensor data available\n", tempered_get_device_path( device ), sensor ); } }
si7005.c ***** Source code taken from this github fork // with 0x0000 = -50?. *tempC = ((float)temp) / 32 - 50;
***** My changes // with 0x0000 = -50?.
*tempC = ((float)temp) *175.72/ 65536 - 46.8;
***** Source code taken from this github fork // There's 16 codes per %RH, with 0x0000 = -24%RH float relhum = ((float)rh) / 16 - 24;
// Linearization
relhum -= -0.00393 * relhum * relhum + 0.4008 * relhum - 4.7844;
***** My changes // There's 16 codes per %RH, with 0x0000 = -24%RH //float relhum = ((float)rh) / 16 - 24; float relhum = ((float)rh)*125 / 65536 - 6;
// Linearization
//relhum -= -0.00393 * relhum * relhum + 0.4008 * relhum - 4.7844;
***** Source code taken from this github fork // Temperature compensation relhum += ( tempC - 30 ) * ( 0.00237 * relhum + 0.1973 );
***** My changes // Temperature compensation //relhum += ( tempC - 30 ) * ( 0.00237 * relhum + 0.1973 );
I created a repository under https://github.com/Diggensag/TEMPered ... hope i didn´t forget something (i am not firm to git yet).
Thanks to both of you, I succesfully added the si7006 sensor to the type_hid folder and updated the build files and this sweet sensor is up and running.
Thanks a lot!
Hello, I tryed to make it work on rapsberry pi (raspbian)
lsusb : Bus 001 Device 014: ID 0c45:7402 Microdia TEMPerHUM Temperature & Humidity Sensor
dmesg [ 319.875624] usb 1-1.2.4: new low-speed USB device number 14 using dwc_otg [ 320.003241] usb 1-1.2.4: New USB device found, idVendor=0c45, idProduct=7402 [ 320.003278] usb 1-1.2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 320.003295] usb 1-1.2.4: Product: TEMPERHUM1V1.2 [ 320.003309] usb 1-1.2.4: Manufacturer: RDing [ 320.023894] input: RDing TEMPERHUM1V1.2 as /devices/platform/bcm2708_usb/usb1/1-1/1-1.2/1-1.2.4/1-1.2.4:1.0/input/input1 [ 320.048794] hid-generic 0003:0C45:7402.0003: input,hidraw0: USB HID v1.10 Keyboard [RDing TEMPERHUM1V1.2] on usb-bcm2708_usb-1.2.4/input0 [ 320.088099] hid-generic 0003:0C45:7402.0004: hiddev0,hidraw1: USB HID v1.10 Device [RDing TEMPERHUM1V1.2] on usb-bcm2708_usb-1.2.4/input1
./hidtest-libusb Device Found type: 0c45 7402 path: 0001:000e:00 serial_number: (null) Manufacturer: (null) Product: (null) Release: 1 Interface: 0
Device Found type: 0c45 7402 path: 0001:000e:01 serial_number: (null) Manufacturer: (null) Product: (null) Release: 1 Interface: 1
unable to open device
./hidtest-hidraw unable to open device
I tryed @JuanKman94 and @Diggensag version. both says : sudo ./tempered Failed to enumerate devices: No HID devices were found. sudo ./hid-query -e No HID devices were found.
any help ?
@G0lph3r yes, sure, I posted the log of hidtest-libusb and hidtest-hidraw In the meanwhile, I managed to make it work on my laptop, and raspberry pi2. Maybe there is some access problems on my old raspberry pi...
