MultiGeiger
MultiGeiger copied to clipboard
Published
20 hours ago •
ecocurious2
ecocurious2
Fix platform version
added multigeiger.ino.cpp to .gitignore set platform to ^3.5.0 in platformio-example.ini
Using the PlatformIO example as is will currently use platform [email protected] and install breaking sub dependencies:
Dependency Graph
|-- U8g2 @ 2.33.7
| |-- SPI @ 2.0.0
| |-- Wire @ 2.0.0
|-- Adafruit BME680 Library @ 2.0.2
| |-- Adafruit BusIO @ 1.11.6
| | |-- Wire @ 2.0.0
| | |-- SPI @ 2.0.0
| |-- Wire @ 2.0.0
| |-- SPI @ 2.0.0
| |-- Adafruit Unified Sensor @ 1.1.5
|-- Adafruit BME280 Library @ 2.2.2
| |-- Adafruit BusIO @ 1.11.6
| | |-- Wire @ 2.0.0
| | |-- SPI @ 2.0.0
| |-- Wire @ 2.0.0
| |-- SPI @ 2.0.0
| |-- Adafruit Unified Sensor @ 1.1.5
|-- Adafruit Unified Sensor @ 1.1.5
|-- IotWebConf @ 3.2.1
| |-- DNSServer @ 2.0.0
| | |-- WiFi @ 2.0.0
| |-- WebServer @ 2.0.0
| | |-- WiFi @ 2.0.0
| | |-- FS @ 2.0.0
| |-- WiFi @ 2.0.0
| |-- EEPROM @ 2.0.0
| |-- ESPmDNS @ 2.0.0
| | |-- WiFi @ 2.0.0
| |-- Update @ 2.0.0
|-- MCCI LoRaWAN LMIC library @ 4.1.1
| |-- SPI @ 2.0.0
|-- NimBLE-Arduino @ 1.3.8
|-- SPI @ 2.0.0
|-- HTTPClient @ 2.0.0
| |-- WiFi @ 2.0.0
| |-- WiFiClientSecure @ 2.0.0
| | |-- WiFi @ 2.0.0
|-- WiFiClientSecure @ 2.0.0
| |-- WiFi @ 2.0.0
instead of the required v1.0 ones I got from @rexfue:
Dependency Graph
|-- U8g2 @ 2.28.8
| |-- SPI @ 1.0
| |-- Wire @ 1.0.1
|-- Adafruit BME680 Library @ 2.0.1
| |-- Adafruit BusIO @ 1.9.3
| | |-- Wire @ 1.0.1
| | |-- SPI @ 1.0
| |-- Wire @ 1.0.1
| |-- SPI @ 1.0
| |-- Adafruit Unified Sensor @ 1.1.4
|-- Adafruit BME280 Library @ 2.2.1
| |-- Adafruit BusIO @ 1.9.3
| | |-- Wire @ 1.0.1
| | |-- SPI @ 1.0
| |-- Wire @ 1.0.1
| |-- SPI @ 1.0
| |-- Adafruit Unified Sensor @ 1.1.4
|-- Adafruit Unified Sensor @ 1.1.4
|-- IotWebConf @ 3.2.0
| |-- DNSServer @ 1.1.0
| | |-- WiFi @ 1.0
| |-- ArduinoJson @ 6.18.5
| |-- WebServer @ 1.0
| | |-- WiFi @ 1.0
| | |-- FS @ 1.0
| |-- WiFi @ 1.0
| |-- EEPROM @ 1.0.3
| |-- ESPmDNS @ 1.0
| | |-- WiFi @ 1.0
| |-- Update @ 1.0
|-- MCCI LoRaWAN LMIC library @ 4.1.0
| |-- SPI @ 1.0
|-- NimBLE-Arduino @ 1.3.8
|-- SPI @ 1.0
|-- HTTPClient @ 1.2
| |-- WiFi @ 1.0
| |-- WiFiClientSecure @ 1.0
| | |-- WiFi @ 1.0
|-- WiFiClientSecure @ 1.0
| |-- WiFi @ 1.0
it is still not clear to me what precisely the problem is. and aren't the library requirement defined by lib_deps?
Nope, the sub dependencies SPI, Wire, WiFi, WiFiClientSecure, HTTPClient, DNSServer are included in the espressif32 platform and can't be handled with lib_deps.
Building with platform espressif32@^4.0.0 and later will result in an error.
Building in release mode
Compiling .pio\build\geiger\src\multigeiger.ino.cpp.o
Linking .pio\build\geiger\firmware.elf
c:/users/${USER}/.platformio/packages/toolchain-xtensa-esp32/bin/../lib/gcc/xtensa-esp32-elf/8.4.0/../../../../xtensa-esp32-elf/bin/ld.exe: C:/Users/${USER}/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/lib\libpp.a(hal_mac.o): in function `hal_init':
(.text.hal_init+0xb4): multiple definition of `hal_init'; .pio/build/geiger/libfd7/libMCCI LoRaWAN LMIC library.a(hal.cpp.o):C:\Users\${USER}\Desktop\MultiGeiger/.pio/libdeps/geiger/MCCI LoRaWAN LMIC library/src/hal/hal.cpp:416: first defined here
collect2.exe: error: ld returned 1 exit status
*** [.pio\build\geiger\firmware.elf] Error 1
======================================================================= [FAILED] Took 34.40 seconds =======================================================================
The terminal process "C:\Users\${USER}\.platformio\penv\Scripts\platformio.exe 'run'" terminated with exit code: 1.
@shin10 "please explain in the commit comments WHY the changes are needed."
You added some comments on github (above), but it would be better to have this in the git commit comments.
So, can you please improve them (and c&p the explanation there)?
Also, it is still unclear why the .gitignore change is needed, add an explanation to that commit, too, please.
You can use git rebase -i master and then "r" to reword the commit comments.
@ThomasWaldmann
Without this change the ESP32 is in a boot loop:
Rebooting...
GEIGER: 1970-01-01T00:03:24 Logging initialized at level 1.
GEIGER: 1970-01-01T00:03:24 BME_Status: not found
Config version: 015
Config size: 319
Loading configurations
[iwcAll]
|-- [iwcSys]
| |-- 'iwcThingName' with value: 'multigeiger'
| |-- 'iwcApPassword' with value: <hidden>
| |-- [iwcWifi0]
| | |-- 'iwcWifiSsid' with value: 'Olunia'
| | \-- 'iwcWifiPassword' with value: <hidden>
| \-- 'iwcApTimeout' with value: '30'
|-- [iwcCustom]
| |-- [misc]
| | |-- 'startSound' with value: 'selected'
| | |-- 'speakerTick' with value: 'selected'
| | |-- 'ledTick' with value: 'selected'
| | \-- 'showDisplay' with value: 'selected'
| |-- [transmission]
| | |-- 'send2Community' with value: ''
| | |-- 'send2Madavi' with value: ''
| | \-- 'send2ble' with value: 'selected'
| |-- [lora]
| | |-- 'send2lora' with value: 'selected'
| | |-- 'deveui' with value: '70B3D57ED005D75D'
| | |-- 'appeui' with value: '0000000000000000'
| | \-- 'appkey' with value: '51BCB9720CB4BB134CB507C07C5A3E0B'
| \-- [alarm]
| |-- 'soundLocalAlarm' with value: 'selected'
| |-- 'localAlarmThreshold' with value: '0.50'
| \-- 'localAlarmFactor' with value: '3'
\-- [hidden]
GEIGER: 1970-01-01T00:03:24 BLE service advertising started, device name: ESP32-9948592, MAC: 3c:71:bf:97:cd:b2
GEIGER: 1970-01-01T00:03:24 ------------------------------------------------------------------------------------------------------------------------
GEIGER: 1970-01-01T00:03:24 Simple Multi-Geiger, Version V1.17.0-dev
GEIGER: 1970-01-01T00:03:24 ------------------------------------------------------------------------------------------------------------------------
[ 1114][E][esp32-hal-gpio.c:102] __pinMode(): Invalid pin selected
E (1091) gpio: gpio_set_level(226): GPIO output gpio_num error
State changing from: 0 to 2
Setting up AP: multigeiger
Use password: <hidden>
AP IP address: 192.168.4.1
AP timeout (ms): 30000
State changed from: 0 to 2
Guru Meditation Error: Core 1 panic'ed (LoadProhibited). Exception was unhandled.
Core 1 register dump:
PC : 0x40085884 PS : 0x00050031 A0 : 0x8008167e A1 : 0x3ffc0f4c
A2 : 0x00002000 A3 : 0x0001a000 A4 : 0x000637ff A5 : 0x3ffc0f2c
A6 : 0x00000008 A7 : 0x3ffbf5a4 A8 : 0x00000000 A9 : 0x00000000
A10 : 0x000003e8 A11 : 0x00000001 A12 : 0x80082261 A13 : 0x3ffc0f0c
A14 : 0x3ffc99b8 A15 : 0xfffffbff SAR : 0x00000004 EXCCAUSE: 0x0000001c
EXCVADDR: 0x8008168a LBEG : 0x00000000 LEND : 0x00000000 LCOUNT : 0x00000000
Backtrace: 0x40085881:0x3ffc0f4c |<-CORRUPTED
ELF file SHA256: 6a6740224cafb044
Rebooting...
GEIGER: 1970-01-01T00:03:26 Logging initialized at level 1.
GEIGER: 1970-01-01T00:03:26 BME_Status: not found