eclipse
Add Support for the Artik Board
Any plans on adding the Artik as one of the supported boards for the mraa library? The Artik team recently released a commercially available version of their board and have documented GPIO interactions with the board through both sysfs and through the kernel.
I can help with hardware testing the library with the board as I got an Artik 5 board on hand if needed.
There are no plans AFAIK but if you have a board and are willing to do a bit of research I imagine it wouldn't be hard. I'm happy to help out and give you a hand with this if you'd like when I get back from holiday in 2 weeks. On 26 Mar 2016 9:45 pm, "Erik Medina" [email protected] wrote:
Any plans on adding the Artik https://www.artik.io as one of the supported boards for the mraa library? The Artik team recently released a commercially available https://www.artik.io/blog/2016/whats-new-in-artik version of their board and have documented https://developer.artik.io/documentation/developer-guide/kernel-gpio.html GPIO interactions with the board through both sysfs and through the kernel.
I can help with hardware testing the library with the board as I got an Artik 5 board on hand if needed.
— You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub https://github.com/intel-iot-devkit/mraa/issues/479
I can try taking a crack at this. Will probably start work on this sometime in April. Open to taking a pull request on this once the work is done?
Yes definitely. I'm more than happy to merge something like this. On 26 Mar 2016 10:49 pm, "Erik Medina" [email protected] wrote:
I can try taking a crack at this. Will probably start work on this sometime in April. Open to taking a pull request on this once the work is done?
— You are receiving this because you commented. Reply to this email directly or view it on GitHub https://github.com/intel-iot-devkit/mraa/issues/479#issuecomment-201977824
Hi @arfoll, @thoughtentity I am going to use Artik board shortly and would like to use mraa to drive Grove sensors. Is there any information on the above mentioned activity please?
Hi @BinduRao2018, adding support for Artik boards is not on the roadmap for the MRAA team and I doubt any of the current project maintainers have the board, but we would be happy to review and merge any community submitted implementations.
Ok, Thanks @Propanu for the clarification. I am in the process of analyzing pin mapping for Eagleye 530s as there is a requirement for us to support on Artik board. I will update/ might seek clarification in this regard on a separate thread.