gnarl icon indicating copy to clipboard operation
gnarl copied to clipboard

Published 20 hours ago • verified publisher icon ecc1

Problems connecting to the AndroidAps.

Open Lexsus opened this issue 5 years ago • 4 comments

In the beginning, a successful connection via bluetooth to the AAPS occurs. But then after some time (10-20 minutes) the commands from the AAPS to the gnarl do not sent. After the reboot, the connection is restored.

p.s I use heltec wifi lora module, I do not think that the problem is in this module.

Lexsus avatar Dec 19 '19 14:12 Lexsus

Have you figured this out? I also have the Heltec wb32la V2 board which is working fine, the performance is very similar to my rileylink on AAPS.

diskaril avatar Feb 14 '20 03:02 diskaril

Have you figured this out? I also have the Heltec wb32la V2 board which is working fine, the performance is very similar to my rileylink on AAPS.

I have problems with connection.

Lexsus avatar Feb 14 '20 14:02 Lexsus

No, I don't really have the setup to debug this much further, and I don't use it "in production" myself. I'll accept patches if you or others find a fix.

ecc1 avatar Feb 14 '20 16:02 ecc1

Have you figured this out? I also have the Heltec wb32la V2 board which is working fine, the performance is very similar to my rileylink on AAPS.

I have problems with connection.

Try this steps, it may work for your board. https://gitter.im/openaps/hardware-dev?at=5e479dcd48ca2e297451bb0f

diskaril avatar Feb 16 '20 22:02 diskaril