zmk-designguide

zmk-designguide copied to clipboard

Leds data pin connected to low frequency output

1

https://github.com/ebastler/zmk-designguide/blob/feaae1f7793e591d2afa24e0e63899b38bbce676/readme.md?plain=1#L127 In the readme you state that a low frequency pin should not be used for the leds data, but in the pictures and schematic you show the leds data...

tomy983

suggestion: protection for battery reverse polarity

2

My understanding is there is no protection for a reverse polarity battery connection in the current design. I think that would be a useful addition since there seems to be...

ergodone

Where do GNDPWR and Earth connect to?

1

Hi, I'm a software engineer, Thank you for the guide! I have a dumb question: In the "USB connectors and protections" section, there are GNDPWR and Earth besides GND. So...

xpol

USB D+ and D- are reversed for the moko MK08a MCU

1

All other MCUs are getting USB D+/D- connected correctly except for moko MK08a:

xpol