orangepi_PC_gpio_pyH3 issues

python.h missing

5

I get fatal error: Python.h: No such file or directory when i call python setup.py install

AST-esp-rasp

port.PA15 & port.PA16

4

Orange Pi ZERO have port.PA15 & port.PA16. But not define in this library,

nopnop2002

Voltage on pin in INPUT mode?

I'm having a problem reading the state on PA19, as it is setting itself to HIGH in INPUT mode? I have an LED connected between PA19 (via 1k resistor) and...

AdvancedStyle

STATUS_LED is connected to a wrong pi number

1

STATUS_LED is connected to a wrong pi number. It is GPA17, but in the mapping file is linked to GPA15

antonio-fernandez

修改i2c传输大小限制

2

cxz119

Files were created to control the RGB Led

1

We can use these files to easily change the rgb lights type

muminkoykiran

Interrupts python RPI GPIOstyle

3

Hi, do you have any way of working with interrupts like you do in RPi GPIO? GPIO.add_event_detect(channel, GPIO.RISING) Thanks. \Marco

maco1717

Conflict with I2C extension during installation

Hi, I am trying to install in Orange Pi Zero. I know there are other forks that updates the pin mapping, but I am ignoring that for now. Installation aborts...

mtanwr