hlsinjector
hlsinjector copied to clipboard
dusterio
Not working?
Hi there ! Thank you for this greate lib but I can't make it work... I inject id3 into each .ts segments i have, at 0 seconds. ffprobe and mediastreamvalidator show me a timed id3 "track" but it's not triggered in my code.
# /root/bin/ffprobe tmpqzw34x62_hls_256/tmpqzw34x62_256.m3u8
Input #0, hls,applehttp, from 'tmpqzw34x62_hls_256/tmpqzw34x62_256.m3u8':
Duration: 00:04:40.66, start: 1.400000, bitrate: 0 kb/s
Program 0
Metadata:
variant_bitrate : 0
Stream #0:0: Audio: aac (LC) ([15][0][0][0] / 0x000F), 44100 Hz, stereo, fltp, 255 kb/s
Stream #0:1: Data: timed_id3 (ID3 / 0x20334449)
Unsupported codec with id 1414087731 for input stream 1
I've tested my playing code with Apple stream samples and it triggers the timedmetadata notification well.
Hi @dehy!
That's strange – this tool is being used on a daily basis on one of my projects.
I noticed that your ffprobe is complaining about stream 1, not stream 0 (where ID3 is). What do you have on stream1? Can you do ffmpeg -i on your source file, before metadata injection?
Having issues as well. Looks like everything is working but the id3 tags aren't being thrown by Flash or an HTML5 player. The third stream 'timed_id3' gets added after I use your program. It's also on a working segment that is throwing the event right.
Input #0, mpegts, from 'fubo-test-000.ts': Duration: 00:00:10.44, start: 1.400000, bitrate: 959 kb/s Program 1 Metadata: service_name : Service01 service_provider: FFmpeg Stream #0:0[0x100]: Video: h264 (Constrained Baseline) ([27][0][0][0] / 0x001B), yuv420p, 640x360, 24 fps, 24 tbr, 90k tbn, 48 tbc Stream #0:1[0x101]: Audio: aac (LC) ([15][0][0][0] / 0x000F), 48000 Hz, stereo, fltp, 146 kb/s Stream #0:2[0x102]: Data: timed_id3 (ID3 / 0x20334449)`
@pcouture what Flash player do you use? I've personally tested this (and using on a daily basis) with flashls and iOS native video player. As for the native HTML5 streaming in browsers - I'm not sure if any browser supports metadata yet (when I developed this, I had no choice but to use a Flash player)
Hey Dusterio,
Thank you for responding. I'm using JWPlayer to try to get the cues because I have it working using Wowza but now I'm trying to do a Kurento RTP stream to ffmpeg HLS output, then I use your script to encode the ID3's. I'm not 100% if I'm encoding the stream right. It plays fine in JWPlayer, HLS.js but not VLC or Safari. Not very senior with ffmpeg.
Do you have any experience with a ffmpeg hls stream with this? I've pasted the encoder settings below if so.
p.s. I've been going through forums all week and its like I"m following your trail a year ago. Flashhls is the one that stands out lol.
Cheers, Peter
var command = ffmpeg({ logger: console.log() }) //, { timeout: 432000 }
.addOption('-probesize', 2147483647)
.addOption('-analyzeduration', 2147483647)
.addOption('-i', 'public/sdps/video-audio3.sdp')
.addOption('-ss', 2)
.addOption('-async', 1)
.addOption('-acodec', 'aac')
.addOption('-ac', 2)
.addOption('-r', 25)
.addOption('-vcodec', 'libx264')
.addOption('-vprofile', 'baseline')
.addOption('-force_key_frames', '2')
//.addOption('-preset', 'superfast')
//.addOption('-tune', 'zerolatency')
.addOption('-x264opts', 'level=31')
.addOption('-s', '640x360')
.addOption('-f', 'segment')
.addOption('-segment_time', 10)
.addOption('-segment_list_flags', '+live')
.addOption('-segment_list', streamPath + '/test.m3u8')
.addOption('-segment_list_entry_prefix', 'https://45.55.45.79:8443/stream/')
.addOption('-segment_format', 'mpegts')
Hey Hi,
But how are you inserting the ID# tags in video. Using what command
On Fri, Mar 25, 2016 at 10:27 AM, Peter Couture [email protected] wrote:
Hey Dusterio,
Thank you for responding. I'm using JWPlayer to try to get the cues because I have it working using Wowza but now I'm trying to do a Kurento RTP stream to ffmpeg HLS output, then I use your script to encode the ID3's. I'm not 100% if I'm encoding the stream right. It plays fine in JWPlayer, HLS.js but not VLC or Safari. Not very senior with ffmpeg.
Do you have any experience with a ffmpeg hls stream with this? I've pasted the encoder settings below if so.
p.s. I've been going through forums all week and its like I"m following your trail a year ago. Flashhls is the one that stands out lol.
Cheers, Peter
var command = ffmpeg({ logger: console.log() }) //, { timeout: 432000 } .addOption('-probesize', 2147483647) .addOption('-analyzeduration', 2147483647) .addOption('-i', 'public/sdps/video-audio3.sdp') .addOption('-ss', 2) .addOption('-async', 1) .addOption('-acodec', 'aac') .addOption('-ac', 2) .addOption('-r', 25) .addOption('-vcodec', 'libx264') .addOption('-vprofile', 'baseline') .addOption('-force_key_frames', '2') //.addOption('-preset', 'superfast') //.addOption('-tune', 'zerolatency') .addOption('-x264opts', 'level=31') .addOption('-s', '640x360') .addOption('-f', 'segment') .addOption('-segment_time', 10) .addOption('-segment_list_flags', '+live') .addOption('-segment_list', streamPath + '/test.m3u8') .addOption('-segment_list_entry_prefix', 'https://45.55.45.79:8443/stream/') .addOption('-segment_format', 'mpegts')— You are receiving this because you commented. Reply to this email directly or view it on GitHub https://github.com/dusterio/hlsinjector/issues/1#issuecomment-201135377
After running this tool on a segment, Getting this error https://github.com/bjarnoldus/momovi-video-hls/blob/master/flash/src/org/mangui/HLS/muxing/PES.as#L66 in flashhls based webplayers
This is the exact error "PES start code not found or not AAC/AVC: 269"
This is the before output from ffmpeg
Stream #0:0[0x100]: Video: h264 (Constrained Baseline) ([27][0][0][0] / 0x001B), yuv420p, 320x240 [SAR 1:1 DAR 4:3], 25 fps, 25 tbr, 90k tbn, 50 tbc
Stream #0:1[0x101]: Audio: aac (LC) ([15][0][0][0] / 0x000F), 48000 Hz, stereo, fltp, 158 kb/s
and after output from ffmpeg
Stream #0:0[0x100]: Video: h264 (Constrained Baseline) ([27][0][0][0] / 0x001B), yuv420p, 320x240 [SAR 1:1 DAR 4:3], 25 fps, 25 tbr, 90k tbn, 50 tbc
Stream #0:1[0x101]: Audio: aac (LC) ([15][0][0][0] / 0x000F), 48000 Hz, stereo, fltp, 158 kb/s
Stream #0:2[0x102]: Data: timed_id3 (ID3 / 0x20334449)
Unsupported codec with id 1414087731 for input stream 2
Hmm, I'm not 100% sure but it looks like that player only allows video or audio streams - no metadata streams. See lines 64 and 65.
I'm personally using this one: https://github.com/mangui/flashls, as well as native iOS player - both play my videos with ID3 metadata just fine.
I'm concerned about your ffmpeg output though - I will check further about it. ffmpeg shouldn't give any warnings
@dusterio The above coderef i have shared is for the flashls only. The above problem is reproduced on flashls build mangui-flashls-df5b9f3
Here is what i am using for id3 injection.
Metadata file contents
1 plaintext TESTING
Script output
** Imported 1 metadata tags
Inserting ID3 frame after frame 3074 (len=188)
Parsed 11276 MPEG TS frames with 0 errors
Total of 1 programs and 2 streams
Injected 1 frames
Finished in 91.257ms
Once above tag is injected into a .ts file, flashls just stalls. (I can play the id3 injected video in mplayer though). In order to test the metadata presence i am using flashls. So far did not had any luck with both (your code & flashls). Not sure which one to check.
I just had one question. Is the time thats specified in the metadata file, relative to the current segment or relative to the entire stream ?. An example in your README should help !
Relative to the segment file you are passing! I, for instance, cut the video in 10 second segments and always inject at 0 seconds - so each of segments has a text in the beginning
@dusterio Thank You. I have tried id3 metadata instead of plaintext and updated to latest flashls from git instead of http://www.flashls.org .Now i can see the id3 tags in the logs of the flashls player and player stalls doesn't happen anymore.
@nareshv good to know! I'm surprised that flashls.org still contains links to the old version, they fixed this a year ago!
One new thing. I am not able to inject the metadata into a segment thats generated using ffmpeg command. Could you help me with this ?
Generate dummy video with ffmpeg
ffmpeg -hide_banner -v warning -y -f lavfi -i smptebars \
-t 5 \
-f lavfi -i anullsrc=r=44100:cl=stereo -c:a aac -strict experimental \
-movflags +faststart \
-c:v libx264 -profile:v baseline -pix_fmt yuv420p -bsf:v h264_mp4toannexb \
-t 5 \
-f mpegts /tmp/out.ts
ffprobe -hide_banner /tmp/out.ts
Input #0, mpegts, from '/tmp/out.ts':
Duration: 00:00:05.02, start: 1.400000, bitrate: 50 kb/s
Program 1
Metadata:
service_name : Service01
service_provider: FFmpeg
Stream #0:0[0x100]: Video: h264 (Constrained Baseline) ([27][0][0][0] / 0x001B), yuv420p, 320x240 [SAR 1:1 DAR 4:3], 25 fps, 25 tbr, 90k tbn, 50 tbc
Stream #0:1[0x101]: Audio: aac (LC) ([15][0][0][0] / 0x000F), 48000 Hz, stereo, fltp, 4 kb/s
Inject the timing
php ./hlsinjector/injector.php -i /tmp/out.ts -m inject -e /tmp/timing.txt -o /tmp/new.ts
** Imported 1 metadata tags
Parsed 167 MPEG TS frames with 0 errors
Total of 1 programs and 2 streams
Injected 0 frames <--------------- Not injected
Finished in 1.394ms
Output of new file from ffmpeg (no id3 tag inserted, but the new stream 0:2 is visible)
ffprobe -hide_banner /tmp/new.ts
[NULL @ 0xa9dbe0] start time for stream 2 is not set in estimate_timings_from_pts
Input #0, mpegts, from '/tmp/new.ts':
Duration: 00:00:05.02, start: 1.400000, bitrate: 50 kb/s
Program 1
Metadata:
service_name : Service01
service_provider: FFmpeg
Stream #0:0[0x100]: Video: h264 (Constrained Baseline) ([27][0][0][0] / 0x001B), yuv420p, 320x240 [SAR 1:1 DAR 4:3], 25 fps, 25 tbr, 90k tbn, 50 tbc
Stream #0:1[0x101]: Audio: aac (LC) ([15][0][0][0] / 0x000F), 48000 Hz, stereo, fltp, 4 kb/s
Stream #0:2[0x102]: Data: timed_id3 (ID3 / 0x20334449)
Unsupported codec with id 1414087731 for input stream 2
ffmpeg version is 2.8
I'm seeing the same problem mentioned above where metadata is not being injected into .ts files created with FFMPEG.
It looks as though this might be because no PTS (presentation timestamps) are being discovered. Any idea why this might be? Is this because FFMPEG is not inserting the optional PES header?
https://github.com/dusterio/hlsinjector/blob/master/injector.php#L231 https://github.com/dusterio/hlsinjector/blob/master/injector.php#L913
I'm seeing the same problem mentioned above where metadata is not being injected into .ts files created with FFMPEG.
It looks as though this might be because no PTS (presentation timestamps) are being discovered. Any idea why this might be? Is this because FFMPEG is not inserting the optional PES header?
https://github.com/dusterio/hlsinjector/blob/master/injector.php#L231 https://github.com/dusterio/hlsinjector/blob/master/injector.php#L913
Dear @byrion, it has been some time. but where you able to solve this?
@BoydRotgans , @byrion ,
This will code will work with ffmpeg versions up to ffmpeg-4.2.2
https://www.johnvansickle.com/ffmpeg/old-releases/ffmpeg-4.2.2-amd64-static.tar.xz
Versions higher that this fail. If someone could isolate the ffmpeg pull request that broke this code it could be updated to work with newer versions of ffmpeg.
