wibox
wibox copied to clipboard
duhow
Fermax Wi-Box managed locally
Fermax Wi-Box
This repository contains hardware and software information from Fermax Wi-Box device, and contains custom scripts and files to patch and use the device locally, instead of using Chinese cloud.
- [x] Disable Sofia (original program) at boot, can be re-enabled
- [x] Allow to modify root password
- [x] Open door remotely via HTTP and MQTT
- [x] Integrate with Home Assistant (MQTT)
- [ ] Use intercom audio
- [x] Build toolset to compile other software
- [x] Use dropbear SSH
This has been tested with following firmware versions:
V500.R001.A103.00.G0021.B007V500.R001.A103.00.G0021.B013
Requirements
This project uses cramfs-tools to extract and build the userdata image.
Install
Check INSTALL document for complete information.
Use sudo make all to run all the steps to prepare your custom image.
You can manually extract and build your image:
sudo cramfsck -x /tmp/cram mtd4-file
sudo mkcramfs -e 0 -v -L /tmp/cram/ /tmp/cramfs.file
Related
Some content is provided from the following sources:
- https://linuch.pl/blog/fermax-wayfi-wideodomofon-hack-czesc-1
- https://linuch.pl/blog/fermax-wayfi-wideodomofon-hack-czesc-2
- https://linuch.pl/blog/fermax-wayfi-wideodomofon-hack-czesc-3
Disclaimer
YOU are responsible for any use or damage this software may cause. This repo and its content is intended for educational and research purposes only. Use at your own risk.
duhow