David Girón
David Girón
Got a interesting key in here: > Parameters that correspond to my speaker It seems that default partition size may differ, probably depending on the board ID that we use....
What are the steps you did to flash the image?
> It trying to boot from mtd5 which not ready at the moment @evgental If you flashed `system0`, that is `mtd4`. You should flash also `system1` and `boot1` if they...
@omnight if you manually patched the same firmware version from your backup, probably it is newer than the **Target version** which the patch is meant for, this is `1.74.10` in...
@rndm2 si haces que sea configurable por el usuario en la interfaz, si, no creo que haya problema 👍🏻
``` pip install --upgrade setuptools ```
Tested with `mysqlclient==1.4.6` and the issue is reproducible. 🐞 Note I'm using `mariadb-dev` package to build the python connector: ``` mariadb-10.5.19-r0 x86_64 {mariadb} (GPL-2.0-or-later) mariadb-backup-10.5.19-r0 x86_64 {mariadb} (GPL-2.0-or-later) mariadb-bench-10.5.19-r0 x86_64...
It should be supported, but I don't have any units to test. Feel free to build the image and flash it. Make sure to backup current flash! Note this seems...