duff2013

icon location everywhere icon location If you can’t fly then run, if you can’t run then walk, if you can’t walk then crawl, but whatever you do you have to keep moving forward.

Results 56 comments of duff2013

RX interrupt (serial_dma_rx_isr) sometimes not fired

I never used alt pins so I will have to investigate this, can you try the loopback example with the alt pins? Just make sure nothing is plugged into those...

RX interrupt (serial_dma_rx_isr) sometimes not fired

I have the loop back working here for over an hour with no problems yet. Are you sure you didn't edit something else in the library? I'm using the current...

RX interrupt (serial_dma_rx_isr) sometimes not fired

That example is using 6MHz baud, try changing it something more reasonable like 115200 baud.

RX interrupt (serial_dma_rx_isr) sometimes not fired

Good, at least this example works now. I should probably change that example baud rate to something all cpu speed can do:)

disable function not working?

Just updated the library, should be fixed now. Thanks for letting me know!

Teensy 3.2 / Teensyduino 1.44 hangs on Uart1Event::begin()

Very well could be I'll take a look.