====================================== ebusd for Brink Renovent Excellent 300

Requirements

• eBus USB Adapter <https://www.mikrocontroller.net/topic/346833>_
• ebusd daemon <https://github.com/john30/ebusd/wiki>_

Setup and Usage

1. Copy the config file 3c.csv to /home/pi/encon/3c.csv on the Raspberry Pi.

2. Open a shell and start the ebusd daemon (assume that the eBus USB Adapter is connected to /dev/ttyUSB1):

   .. code-block:: shell-session

   $ ebusd -f --logareas bus --loglevel info -d /dev/ttyUSB1 -c /home/pi/ 2017-02-10 17:51:23.365 [bus notice] signal acquired 2017-02-10 17:51:23.968 [bus notice] new master 37, master count

3. Open a second shell and use the ebusd ebusctl <https://github.com/john30/ebusd/wiki/5.-Tools#ebusctl>_ command-line tool to read or write the defined parameters of the Brink Renovent Excellent 300.

   For example:

   .. code-block:: shell-session

   $ ebusctl read Aussenlufttemperatur 9.6 $ $ ebusctl read BetriebsstundenTotal 15155;32768;32767;1;0 $ $ ebusctl read SoftwareVersion S1.05.07 0004

The shell script test.sh can be used to query all defined parameters in 3c.csv:

.. code-block:: shell-session

$ ./test.sh done

SoftwareVersion S1.05.07 0004

Press any key to continue... Ventilatorbetrieb Feuchteschutz

Press any key to continue... TatsaechlicheDrehzahlZuluft 1056

...

Note: Another config file for the Brink Renovent Sky 300 from paddyx <https://www.mikrocontroller.net/user/show/paddyx>_ (Patrick K.) can be found here <https://www.mikrocontroller.net/attachment/315753/3c.csv>_. It should be also compatible with the Brink Renovent Excellent 300.