QSSTV CAT not working with FLRig

[dgarley]

v2 Hampi, Pi4 8GB, IC-7300 On a fresh hampi image install (no updates) QSSTV does not CAT thru FLRig. (audio no problem)

NOTE: 2 other of the usual apps I use function normally with FLRig on HamPi: WSJT-X FLDigi

NOTE: Ran updates today (from pi taskbar auto-update notifier), no change in observed QSSTV/FLrig behavior.

Indications: "NO RIG" displayed bottom status bar of QSSTV Selecting different freqs via QSSTV dropdown in bottom status bar no effect i.e. no change in FLRig or rig freq. Selecting different frequencies on FLRig does not change frequency display on bottom of QSSTV Transmitting on QSSTV does not key rig (or light the PTT box on FLRIG) Transmitting on QSSTV and MANUALLY pressing PTT on FLrig keys rig, sends tones. FLRig itself appears normal, can change freqs, filters, volume, observe S meter changes etc on FLRig console.

Both launching FLRig / QSSTV fresh after reboot or trying QSSTV after successfully using WSJT-X/FLRig and no reboot produces same result.

NOTE: The same versions of QSSTV and FLRig that are in HAMPI v2 image do work together when pi is booted and running on a different (NON-HAMPI) Bullseye microsd image and KM4ACK Build-A-Pi script installing QSSTV/FLRig/WSJT-X,FLDigi etc.

Settings and some basic diagnostics I have tried on HamPi:

Multiple reboots, full cold iron powe-off power back on, always launch FLRig first.

at least some socket connectivity exiasts between FLrig and QSSTV as shown by "lsof | grep localhost" about 30 lines of output showing connections between flrig and qsstv on port 12345 and various qsstv ports (example 2 lines shown ) qsstv 9491 9510 soundBase pi 31u IPv4 147061 0t0 TCP localhost:43044->localhost:12345 (ESTABLISHED) flrig 7898 7906 flrig pi 13u IPv4 146023 0t0 TCP localhost:12345->localhost:43044 (ESTABLISHED)

CAT settings on QSSTV: "Enable Hamlib Cat Interface" checked "Radio Model" 4 FLRig,FLRig "Serial Port/Host" localhost:12345 "PTT Control via" CAT(Voice Port)

FLRig Xcvr settings: Rig: IC-7300 /dev/serial/by-id/usb-Silicon_Labs_CP2102_USB_to_UART_Bridge_Controller_IC-7300_02042211-if00-port0 (Same result if /dev/ttyUSB0 selected) Baud 19200 1 Stop bit Echo addr: 0x94 USB audio: checkmark

FLRig Server setting: Xmlrpc port: 12345

FLRig TCPIP settings: 127.0.0.1 4001 "Use tcpip" NO checkmark

VERSIONS: FLRig ver. 1.4.4 QSSTV ver. 9.5.8

7300 CIV settings: civ baud rate = 19200 addr: 94H CIV Transceive ON CIV USB Remote Transceive addr 00H CIV USB port UNLINKED FROM REMOTE CIV echoback ON

Dave, by the way thanks for all the hard work putting this together! 73 de WH6A

[dslotter]

I've confirmed this behavior. I'll investigate and provide a fix.