ds2k5 comments

Results 86 comments of


                                            ds2k5

hang on restore - FDR 0x559117bfef10 waiting for message... No data to read (timeout)

>Just rebuild everything from latest source code. ok I will try - thanks

FW Update NanoVNA-H 4 - FW Version 1.2.43 to 1.2.46 not work - dfu-util: No DFU capable USB device available

@Ho-Ro thanks did change it but did no flashing the ID is not: 483:df11 it is still: 0483:5740

FW Update NanoVNA-H 4 - FW Version 1.2.43 to 1.2.46 not work - dfu-util: No DFU capable USB device available

Solution is: 1. power Off 2. press thumbWheel down and hold 3. power on 4. display keep black now the device is in DFU mode from menu did not work...

FW Update NanoVNA-H 4 - FW Version 1.2.43 to 1.2.46 not work - dfu-util: No DFU capable USB device available

@orborbson >But does firmware v1.2.46 (DiSlord) work correctly with SJWCH5351 (SMC5351)? are you think this is the wrong firmware for my device ?

Unable to read the firmware version after six attempts | Received a NAK to the SET_FREQ command from the modem

after slow down the UART Speed to 115200 ``` [Modem] # Valid values are "null", "uart", "udp", and (on Linux) "i2c" Protocol=uart # The port and speed used for a...

Unable to read the firmware version after six attempts | Received a NAK to the SET_FREQ command from the modem

Here is was I changed: 1. UART Speed to 115200 2. disable all except DMR 3. Set: LocalAddress=0.0.0.0 in [DMR Network] ``` [DMR Network] Enable=1 # Type may be either...