drtrigon

Support for 1-wire protocol

2

Please add support for 1-wire protocol.

Master unable to read emulated DS2438

9

I tested the DS2438 from M-o-a-T [1] to find that this is actually a fork of the code here. So I also tested this [2] and have the same issue...

Enhance specification with minimal power consumption

2

I would like to know the minimal power consumption of the board an how I can minimize it. I did a very simple fast measurement and got around 60 to...

Speed-up memory access using PLL?

4

I was working on https://github.com/drtrigon/fpgarduino-icestorm and have setup a picorv32 with peripherials in order to emulate/mimic an arduino uno board. During this I came to the point where I would...

OMEMO not available after login

1

**Describe the bug** Whenever I come back after some time to conversejs I have to login again. After this login the OMEMO encryption is not switched on and if I...

Companion compare of model's checklist settings wrong for TX16S

7

When using companion with TX16S and comparing the model's checklist, 2 issues arise: 1. if the checklist displaying option is off the checklists are not displayed in compare window -...

continous android build?

13

Is there a reason why the most recent android release dates back to end 2017?

Scope freezing after going out of range (?)

10

After solving #55 the PSU does not work anymore. I have to use "Pause" on Scope CH1 twice (Pause on, Pause off) in order to make the voltage setting for...

Sensor-Watch Lite temperature offset

4

Dear Sensor-Watch Makers Thanks for this nice and clever product. I quite like it! While using it as a thermometer I found that the temperature reported is about +1°C compared...

Add support for EthernetTCP strategy

4

I am planning to use the https://github.com/gioblu/PJON/blob/master/examples/ARDUINO/Local/EthernetTCP/SoftwareBitBangSurrogate/Surrogate/Surrogate.ino on an Arduino Yun (or ESP8266). On the "server side" I would like to be able to use PJON-python to access the Surrogate...