deconz-rest-plugin
deconz-rest-plugin copied to clipboard
dresden-elektronik
Request for Tuya Smart Zigbee Temp and Humidity Sensor manu:"_TZ3000_bjawzodf" / model: "TY0201"
Is there already an existing issue for this?
- [X] I have searched the existing issues and there is none for my device
Product name
Tuya Smart Zigbee Temp and Humidity Sensor
Manufacturer
_TZ3000_bjawzodf
Model identifier
TS0201
Device type to add
Sensor
Node info
Endpoints and clusters
Basic
Further relevant clusters
Power Configuration
On/Off
Level Control
Color Control
Thermostat
Simple Metering
Electrical Measurement
Any other cluster of relevance/interest
there is already a "quirk" for this device in ZHA but i dont know if its possible to convert a quirk in a DDF: https://github.com/zigpy/zha-device-handlers/issues/2862
Hab jetzt die json von einem ähnlichen Gerät genommen und Manufacturer angepasst. Einlesen in Phoson war erfolgreich und Daten werden gelesen und aktualisiert. Ich werde mal bis heute Abend beobachten, ob die Daten konsequent weiter im Systen ankommen.
{
"schema": "devcap1.schema.json",
"manufacturername": "_TZ3000_bjawzodf",
"modelid": "TY0201",
"vendor": "Tuya",
"product": "Temperature and humidity locked sensor",
"sleeper": true,
"status": "Gold",
"subdevices": [
{
"type": "$TYPE_TEMPERATURE_SENSOR",
"restapi": "/sensors",
"uuid": [
"$address.ext",
"0x01",
"0x0402"
],
"items": [
{
"name": "attr/id"
},
{
"name": "attr/lastannounced"
},
{
"name": "attr/lastseen"
},
{
"name": "attr/manufacturername"
},
{
"name": "attr/modelid"
},
{
"name": "attr/name"
},
{
"name": "attr/swversion",
"parse": {"fn": "zcl:attr", "ep": 1, "cl": "0x0000", "at": "0x0001", "script": "tuya_swversion.js"},
"read": {"fn": "zcl:attr", "ep": 1, "cl": "0x0000", "at": "0x0001"}
},
{
"name": "attr/type"
},
{
"name": "attr/uniqueid"
},
{
"name": "config/battery",
"awake": true,
"parse": {
"at": "0x0021",
"cl": "0x0001",
"ep": 1,
"eval": "Item.val = Attr.val / 2;",
"fn": "zcl:attr"
}
},
{
"name": "config/offset"
},
{
"name": "config/on"
},
{
"name": "config/reachable"
},
{
"name": "config/tuya_unlock"
},
{
"name": "state/lastupdated"
},
{
"name": "state/temperature",
"awake": true
}
]
},
{
"type": "$TYPE_HUMIDITY_SENSOR",
"restapi": "/sensors",
"uuid": [
"$address.ext",
"0x01",
"0x0405"
],
"items": [
{
"name": "attr/id"
},
{
"name": "attr/lastannounced"
},
{
"name": "attr/lastseen"
},
{
"name": "attr/manufacturername"
},
{
"name": "attr/modelid"
},
{
"name": "attr/name"
},
{
"name": "attr/swversion",
"parse": {"fn": "zcl:attr", "ep": 1, "cl": "0x0000", "at": "0x0001", "script": "tuya_swversion.js"},
"read": {"fn": "zcl:attr", "ep": 1, "cl": "0x0000", "at": "0x0001"}
},
{
"name": "attr/type"
},
{
"name": "attr/uniqueid"
},
{
"name": "config/battery",
"awake": true,
"parse": {
"at": "0x0021",
"cl": "0x0001",
"ep": 1,
"eval": "Item.val = Attr.val / 2;",
"fn": "zcl:attr"
}
},
{
"name": "config/offset"
},
{
"name": "config/on"
},
{
"name": "config/reachable"
},
{
"name": "state/humidity",
"awake": true
},
{
"name": "state/lastupdated"
}
]
}
],
"bindings": [
{
"bind": "unicast",
"src.ep": 1,
"cl": "0x0001",
"report": [
{
"at": "0x0021",
"dt": "0x20",
"min": 3600,
"max": 84600,
"change": "0x00000002"
}
]
},
{
"bind": "unicast",
"src.ep": 1,
"cl": "0x0402",
"report": [
{
"at": "0x0000",
"dt": "0x29",
"min": 60,
"max": 300,
"change": "0x00000064"
}
]
},
{
"bind": "unicast",
"src.ep": 1,
"cl": "0x0405",
"report": [
{
"at": "0x0000",
"dt": "0x21",
"min": 60,
"max": 300,
"change": "0x00000064"
}
]
}
]
}
Hello, there is the model _TZE200_bjawzodf in this DDF https://github.com/dresden-elektronik/deconz-rest-plugin/blob/master/devices/tuya/_TZE200_bjawzodf_humidity_temp.json Can you try to add your model to this list ? probably one more clone ?
But honneslty your DDf is better, this one miss the bind/report. I think it's better to mix the 2 DDF if they are compatibles.
Edit: Have found a more generic DDF https://github.com/dresden-elektronik/deconz-rest-plugin/blob/master/devices/tuya/_TZE200_TS0601_humidity_temp.json And this one haven't the bind/report part too, perhaps not usefull for tuya.
Edit2: I think I have found the better DDF ^^ to add your device https://github.com/dresden-elektronik/deconz-rest-plugin/blob/master/devices/tuya/_TZ3000_TS0201_temp_hum_sensor.json
Thanks, the last one you found is the same i used at the end. Since this morning its working without issues. For me topic is solved. Perhaps someone can start a PR with my modified code. I dont know how to do.
Sure https://github.com/dresden-elektronik/deconz-rest-plugin/pull/7889 As you have used the same DDF, have just added your device to the list, thx for report and tests.
one fault on my side. i started the thread with Model identifier : TS0201. That was not correct. it is TY0201 (was a typo). can you pls correct it in the PR? sorry for the extra work
using deCONZ v2.28.1 with ConbeeII.
I have "manufacturername": "_TZ3210_ncw88jfq", "modelid": "TS0201", Is ali/tuya temperature/humidity sensor for € 4,50. I used the json from Stefan.
Had to place it in usr/../devices.... $home/.local... doesn't get read at startup/reboot etc.
Works well, is recognized in deCONZ and Phoscon App as a sensor (temperature/humidity) .
Humidity is reported wrong 6,3 % instead of 63 %. Can i change that in the .json ? Or any other idea ?
I don't don't found another DDF as sample, but for you better to create a new DDF instead of using an old one and change this part
{
"name": "state/humidity",
"awake": true
},
by
{
"name": "state/humidity",
"parse": {
"at": "0x0000",
"cl": "0x0405",
"ep": 1,
"eval": "Item.val = Attr.val * 10 + R.item('config/offset').val",
"fn": "zcl:attr"
},
"default": 0
}
Thank you Smanar ! , i figured that out but changed to :
{ "name": "state/humidity", "awake": true, "parse": { "at": "0x0000", "cl": "0x0405", "ep": 0, "eval": "Item.val = Attr.val * 10 + R.item('config/offset').val", "fn": "zcl:attr" }, "default": 0 },
I also added battery reading
{ "name": "config/battery", "refresh.interval": 7265, "read": { "at": "0x0021", "cl": "0x0001", "ep": 1, "fn": "zcl:attr" }, "parse": { "at": "0x0021", "cl": "0x0001", "ep": 1, "eval": "Item.val = Attr.val / 2" }, "default": 0
Ha ? the previous battery reading was not working ? If all is fine can make a PR to submit the device ? Or want I make it ? (if you share the complete working DDF)
@Smanar thank you. you can add the device to the mentioned json. I can’t make a PR. I just started last week with DeCONZ, Zigbee etc. I still have to learn about them. Neither do i have experience with Github. i am also working on some other sensors i bought.
Directly from DeCONZ
_TZ3210_ncw88jfq_temp-hum-sensor.json
The temperature at cluster 0402 id 0000 is 2550 but reported on Phoscon App as 25. It misses the digits behind the comma.
Also Min/max measurement is not show in the Phoscon App.
Min and Max are not displayed in phoscon, but decimal need to be visible, can you check direclty in the API ? Using Phoscon/help/API Information/sensors
PR created https://github.com/dresden-elektronik/deconz-rest-plugin/pull/7908
Have edited some stuff, like the missing bind/report for battery, so have used defaut code with.
Phoscon/help/API Information/sensors :
But in http://192.168.2.32:8080/pwa/devices-sensors2.html?_v=8af8975ffa0c93c20a8c5db60e99f4a70b44c8c5,8,1,19&gwid=00212EFFFF09D402#sensor/3
Also 25 and not 25,7
Ok so the issue is from Phoscon, not the API. IDK why they have made this choice. Here I can do nothing ....