SOLVED - LK Wiser (FLS/AIRLINK/4)

[Hassefar]

Describe the bug

The LK Wiser (FLS/AIRLINK/4) is a 4 button switch. The newest devices does not register the press on button 3 and 4 correctly. Consequently, a press on button 3 is registered as a press on button 1 and a press on button 4 is registered as a press on button 2.

Steps to reproduce the behavior

If the problem is reproducable, list the steps here:

Assign different actions to each button i Deconz. Press button 3 and 4 and this will trigger action 1 or 2 respectively.

Expected behavior

Button 3 and 4 should be registered as individual buttons.

Screenshots

Environment

Version: 2.17.01 / 1.7.2022

• Host system: (Raspberry Pi)
• Running method: (Raspbian)
• Firmware version: (26720700)
• deCONZ version: (2.17.01 / 1.7.2022)
• Device: (ConBee II)
• Do you use an USB extension cable: Yes
• Is there any other USB or serial devices connected to the host system? If so: SSD

[Hassefar]

SOLVED

[Mimiix]

What did you change :)?

[Hassefar]

Pressed button 1 and 4 for about 5 seconds to enable individual buttons. :-)

[github-actions[bot]]

As there has not been any response in 21 days, this issue has been automatically marked as stale. At OP: Please either close this issue or keep it active It will be closed in 7 days if no further activity occurs.

[github-actions[bot]]

As there has not been any response in 28 days, this issue will be closed. @ OP: If this issue is solved post what fixed it for you. If it is not solved, request to get this opened again.