Jon Escombe

> If you enable binary output that should be usable? Yep, I've added an entry to my "External Tools" menu to call a command line DFU uploader, that seems to...

> I may eventually try to set up a GitHub action to build the PlatformIO firmwares automatically. This turned out to be easier than I expected - is now building...

> @dresco did you find any specific documentation to set up the automatic builds? This is something I would like to do on the F4xx driver. @andrewmarles Only from the...

Hi, the PlatformIO section in the core wiki is pretty out of date (was carried over from the old repository structure). Have you looked at the readme in the STM32F4...

@terjeio Do you want to delete the "Using PlatformIO for Arduino development" page from the core Wiki? My build instructions in there are outdated now, and I think the subject...

> @dresco Have you had success compiling Grbl-HAL to SKR 1.3? Am assuming you meant this for @Domush, rather than me? Afraid I don't have any LPC boards, else I'd...

Have done a bit more testing. For me, at the start of a job - when there is data in both the receive buffer and planner buffer, then overrides work...

Interesting, that one works for me too. Here is one that doesn't; ``` (Exported by FreeCAD) (Post Processor: grbl_post) (Output Time:2022-02-27 09:57:39.896810) (Begin preamble) G17 G90 G21 (Begin operation: Fixture)...

It appears to be caused by the spindle stop (M5). As soon as that's removed, or the program end is moved above it, the issue goes away..

> That would be a complete rewrite? I wonder if something like [Avalonia](https://avaloniaui.net/) would be viable? Though I'm sure you have more than enough to do already! ;)