dremin
Not appearing on all three monitors
For my first few minutes with retrobar it correctly appeared on all three of my displays, however it stopped doing so when reloading it during configuration & has yet to load on my rightmost monitor since.
my monitor config is unique and none match so gut says something with that?
left: 1024x1280 (portrait) mid: 1920x1080 right: 3840x2160
What Windows scaling setting is being used on each monitor? Is it (from left-to-right) 100%, 100%, 200%?
What Windows scaling setting is being used on each monitor? Is it (from left-to-right) 100%, 100%, 200%?
100, 100, 150
in display 1s logs it shows 5760 for one of the dimensions, the only number in any of those that is outside the range of the monitor... could be our culprit?
Did some more testing.
RetroBar appears as intended if: -the 4K monitor is set as primary -the 4K monitor is manually set to 1080p in Windows Settings
the following have no effect: -disabling the left monitor (3:4) -changing the scaling setting on the 4K monitor