drefk2000

I have ordered another ledstrip (still LPD8806, with 48 diods per m) I suspect something is fishy with this one. The first 20 leds shines extremly bright whitish and the...

I will try that, but as I said I have other strange behavior from the strip to address first. I will try it when I get my new strip and...

@ Phil1988 "and about the 9v power supply: If your LEDs need 5V (the PI does) you cant use it!!! Taking a power supply with higher current is ok but...

Why would I get flickering leds by using seperate power supplies for the pi and the leds? I have two 5v supplies today and even if I have other problems...

It not that I don't belive you, I just have to see it for myself and if it happens I must try to explain it. I can't stand "It's this...

See? A solution! Thank you Skickat från min iPhone > 2 dec 2013 kl. 10:16 skrev "Kris" [email protected]: > > I use 2 different power supplies, one for the PI...

It works like a charm now. No flickering lights, the PI is running at 5 volts and the strip at 9 volts. I put the strips GND on the GND...

Yes I did Skickat från min iPhone > 25 nov 2013 kl. 01:02 skrev "Brandon Butler" [email protected]: > > You bought the usb grabber from the main readme? > >...

Because I didn't know better. It said that it was troublesome but he did get it to work. If someone can get it to work surely they would be able...

Stockholm Skickat från min iPhone > 25 nov 2013 kl. 08:34 skrev "duenorh" [email protected]: > > Vart bor du? > > — > Reply to this email directly or view...