Stefan

Hello Wolle, thank you very much - so it will create a manual partition table in the IDE, this should work. Thanks for quick response! Stefan

Ich sehe gerade dass wir wohl beide aus D kommen :-) Darf ich noch fragen, ob ein LAN bzw. Ethernet Support geplant ist? Ich habe hier gerade eine Version mit...

Hallo Wolle, vielen Dank für die Rückmeldung - so hatte ich das vor, das ist sicher der beste Weg mit der Erweiterung der boards.txt. Ich versuche das mit LAN mal...

Same problem here :-) Just gone back to EOTA 2.26, but with no success. The update itself works fine, but the webserver stays at 100% with no feedback of success.

Thanks a lot! Before i manually change parts of the lib...do you think there will be an update of the whole lib in future? It seems that the last revision...

This is all related to the mismatching circuit of VS1053B to the class D. For the PAM8403, you can find here some useful hints (german only): https://esp8266-server.de/Internetradio.html#SchaltplanA The quick&dirty solution...

BTW: i have designed my own hardware with VS1053 and applied class D. The sound is amazing, no transfomer etc. are needed.

My application circuit is very complex and i use another amplifier with different audio input path than the PAM, so it think that doesn't really help. If you follow the...

All you have to do is a connection from GBUF pin of the VS1053 to the VREF pin of the PAM, then the noise will disappear.

VS1053 pcb design is really complex to get a good result, there are a lot of things to pay attention for like ground planes, current paths and ripple handling of...