Is external GPS Antenna Actively powered?

[Romeo-Golf]

trafficstars

Having read a user who had to add "a cable to feed 5V to the centre pin of the external GPS antenna connector to use an active antenna" I just wanted to check if the external GPS antenna socket is supposed to be powered?

https://www.tiny-dev.com/lora-p2p-communication-with-lopy-dragino-lora-gps-hat-for-raspberry-pi/

[dragino]

The current version doesn’t support external active GPS antenna, you have to use none-active one (no need voltage). We will add that in future hardware version.

发件人: Romeo-Golf [mailto:[email protected]] 发送时间: 2017年1月3日 20:17 收件人: dragino/Lora 抄送: Subscribed 主题: [dragino/Lora] Is external GPS Antenna Actively powered? (#3)

Having read a user who had to add "a cable to feed 5V to the centre pin of the external GPS antenna connector to use an active antenna" I just wanted to check if the external GPS antenna socket is supposed to be powered?

https://www.tiny-dev.com/lora-p2p-communication-with-lopy-dragino-lora-gps-hat-for-raspberry-pi/

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/dragino/Lora/issues/3 , or mute the thread https://github.com/notifications/unsubscribe-auth/AAnz1pyQS4ekX9eDT2hIFuWUyDBZg3DZks5rOjwwgaJpZM4LZkV4 .说明: 图像已被发件人删除。

[Romeo-Golf]

Thanks, it would be great if the future revisions of the board had the ability to provide +5v to support active antennas... Would it be possible to have an LED to indicate when power is being drawn?

Also is it worth having another issue thread to track the planned changes for the future revision? :)

[electron1979]

Most new devices will be 3.3V based, so this option will need to be considered, too

[dragino]

Version LoRa GPS HAT v1.4 already upgraded to supported external active antenna.