PhyloSuite
PhyloSuite copied to clipboard
dongzhang0725
Model invalid!
ModelFinder v2.2.0 (Kalyaanamoorthy et al., 2017) was used to select the best-fit model using BIC criterion. Best-fit model according to BIC: Q.pfam+R5.然后建树时没有这个模型，请问怎么解决，谢谢老师。
这是因为IQTREE新加了模型，老版本phylosuite没有，有2种方案解决：
- 加群 793392807，里面有新版phylosuite，可以支持这些模板；
- 可以用IQTREE的自定义模型解决
lijie9654 @.***> 于2024年4月6日周六 21:38写道：
ModelFinder v2.2.0 (Kalyaanamoorthy et al., 2017) was used to select the best-fit model using BIC criterion. Best-fit model according to BIC: Q.pfam+R5.然后建树时没有这个模型，请问怎么解决，谢谢老师。
— Reply to this email directly, view it on GitHub https://github.com/dongzhang0725/PhyloSuite/issues/92, or unsubscribe https://github.com/notifications/unsubscribe-auth/ADZXXOMV5AMLOAK2ZKUS6P3Y373FHAVCNFSM6AAAAABF2OTKGWVHI2DSMVQWIX3LMV43ASLTON2WKOZSGIZDSMRUGUZTSMQ . You are receiving this because you are subscribed to this thread.Message ID: @.***>
准确来说应该是以自定义命令形式运行，就是在自动生成的命令基础上，换成你的最佳模型去跑
lijie9654 @.***> 于2024年4月7日周日 09:30写道：
好的，谢谢老师。这个自定义模型和ModelFinder最佳模型最后建树结果差异大吗？
— Reply to this email directly, view it on GitHub https://github.com/dongzhang0725/PhyloSuite/issues/92#issuecomment-2041266749, or unsubscribe https://github.com/notifications/unsubscribe-auth/ADZXXOI6RYSV5FYZGKSR7ATY4COUXAVCNFSM6AAAAABF2OTKGWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDANBRGI3DMNZUHE . You are receiving this because you commented.Message ID: @.***>