Impossible to deactivate a channel using option 2/3.

[bvanderhoek]

With firmware 2.11 and HT2.10 app, it seems impossible to turn off a channel, for a test i had X,Y,Z active on channels 7,6,5. I wanted to deactivate Y, roll in the AUX config tab, but OFF doesnt seem to be stored in NVR. after reboot last channel number is restored incorrectly.

[bvanderhoek]

Note last resort is full chip erase and reinstall firmware 2.11

[dlktdr]

There was a bug here. Thank you for bringing it to my attention.

https://github.com/dlktdr/HeadTracker/commit/3336760798b746e5777dc944e43c419dd1a3a057

You can use this beta copy of V2.2, there is a "Restore Defaults" option in the GUI under Diagnostics to wipe the firmware values to default. Note this requires that the 2.2 firmware is also on the device. The above fix was also applied to the GUI.

HT22Beta.zip

Replace the .exe with V2.1. Use upload from local file and choose the BLE v2.21.bin firmware

Note this is a Beta Version there are other issues still, it's not complete.

[dlktdr]

Completed