dstarrepeater opens but has err 111 tcp connection and will not open modem and uses dummy modem.

[ki8as]

we have the 2meter and 440 modules of the icom repeater with a dstar controler.

I have the modem and network tabs set up as in manual to no avail.

running out of chioces.

help Tom C

KI8AS

[ki8as]

dv-rptr V2 Network 127.0.0.1 port 2011

On Thu, Nov 12, 2020 at 7:00 PM Adrian Fewster [email protected] wrote:

Modem connect will depend on serial connection being correct. What is the modem type ?

The 111 tcp connection error is common and can usually be ignored. What is the modem ? What does (if linux) dmesg | grep ACM tell you, compared to your modem configuration ?

Please note that moden versions are on the G4KLX repositories.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/dl5di/OpenDV/issues/168#issuecomment-726416069, or unsubscribe https://github.com/notifications/unsubscribe-auth/ADZRORELUYYGKNFLT55ASQTSPRZITANCNFSM4TT45U4Q .

[johnhays]

Didn't you say you were running an Icom controller? https://nw-digital-radio.groups.io/g/udrc/wiki/1391#A-Repeater-on-an-Icom-ID-RP2C -- your port looks wrong and as I recall all the repeaters on an RP2C should be at the same port and address.

On Thu, Nov 12, 2020 at 4:08 PM ki8as [email protected] wrote:

dv-rptr V2 Network 127.0.0.1 port 2011

On Thu, Nov 12, 2020 at 7:00 PM Adrian Fewster [email protected] wrote:

Modem connect will depend on serial connection being correct. What is the modem type ?

The 111 tcp connection error is common and can usually be ignored. What is the modem ? What does (if linux) dmesg | grep ACM tell you, compared to your modem configuration ?

Please note that moden versions are on the G4KLX repositories.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/dl5di/OpenDV/issues/168#issuecomment-726416069, or unsubscribe < https://github.com/notifications/unsubscribe-auth/ADZRORELUYYGKNFLT55ASQTSPRZITANCNFSM4TT45U4Q

.

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/dl5di/OpenDV/issues/168#issuecomment-726418883, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABR7I6W4J75LF2FH4CWC273SPR2I7ANCNFSM4TT45U4Q .

-- John D. Hays Kingston, WA K7VE