dl1com
dl1com
_From @niccokunzmann on May 31, 2016 20:11_ Part of #9. _Copied from original issue: AllYarnsAreBeautiful/ayab-desktop#33_
_From @niccokunzmann on May 31, 2016 20:12_ some things are done in represition, e.g. simple patterns they should be displayed in an understandable way _Copied from original issue: AllYarnsAreBeautiful/ayab-desktop#34_
_From @niccokunzmann on May 31, 2016 20:14_ the language should be shown as described in [wikipedia](https://en.wikipedia.org/wiki/Knitting_abbreviations#List_of_knitting_abbreviations), _Copied from original issue: AllYarnsAreBeautiful/ayab-desktop#35_
_From @niccokunzmann on May 31, 2016 20:14_ null _Copied from original issue: AllYarnsAreBeautiful/ayab-desktop#36_
In the current version (1.0.3), loading a somewhat "big" image (e.g. 160x30) causes a severe performance impairment on the GUI (gets stuck, is barely usable - I am using a...
By sending the firmware version to the server, users can actively but selectively be informed that there is new firmware available for their sensors. Also, if it turns out later...
Depending on the controller hardware, the user has to choose between Wemos.ino and WifiShield.ino in the /examples folder. Although they take care of special prerequisites caused by the different hardware,...
This Pull Request consists of three improvements: - As already stated for the WifiShield Sketch in https://github.com/hackair-project/hackAir-Arduino/pull/12, a time-based retry mechanism for the sensor measurement has been implemented. - The...
In the current version of Wemos.ino, a failing DHT humidity reading (this happens from time to time, or, there is simply no DHT sensor attached) is not handled. The humidity...