Is z_calibration plugin supported?

[NamkingWIN]

Hi, I have done with the guide at https://github.com/protoloft/klipper_z_calibration#preconditions But the moonraker log show below: [update_manager client z_calibration] path = /home/klippy/klipper_z_calibration origin = https://github.com/protoloft/klipper_z_calibration.git 2022-02-01 12:10:59,968 [shell_command.py:_check_proc_success()] - Command (git -C /home/klippy/klipper_z_calibration status -u no) successfully finished 2022-02-01 12:10:59,978 [shell_command.py:_check_proc_success()] - Command (git -C /home/klippy/klipper_z_calibration config --get branch.master.remote) successfully finished 2022-02-01 12:10:59,988 [shell_command.py:_check_proc_success()] - Command (git -C /home/klippy/klipper_z_calibration remote get-url origin) successfully finished 2022-02-01 12:11:02,523 [git_deploy.py:initialize()] - Git Repo z_calibration: Initialization failure

How do I fix that?

[dimalo]

I'm sure it has to do with permissions on the folder. make sure the klippy user has write permissions

[dimalo]

@NamkingWIN please check with imagetag :next

I did not test as I don't have a suitable printer - please leave a feedback if the extension and updates work for you