Antonino Di Guardo
Antonino Di Guardo
@AniLeo maybe you could verify if the issues have been fixed
is that still an issue?
@MLiv79 You reported the printing is stopped but I need some details for a further investigation. Do you see some errors reported on screen during the print or just before...
ok, so apparently in your case it seems a bug on fetching data. If possible share a print file I could test. If you have a WiFi module plugged in...
ok thanks. I will try this file. I see it is generated by SuperSlicer. Maybe the issue could be related to the gcode parser. If possible, provide also your `config.ini`...
> Had Kisslorand's firmware for a year, not one issue with it, upgraded to newer marlin so I thought will get newsest BTT TFT firmware as well, gee.. when printing...
@MLiv79 I tried you gcode files more than 10 times without any freeze or other issues. Based on your report (in particular you reported no error on screen but only...
> > [@MLiv79](https://github.com/MLiv79) I tried you gcode files more than 10 times without any freeze or other issues. Based on your report (in particular you reported no error on screen...
attached PR #2970 that could fix your issue. `config.ini` has been updated with the new param `tx_delay` and `tx_prefetch`. I used a delay of 3 ms. I disabled advanced_ok and...
@ehw is that still an issue?