Die Peter Pan

Thank you, I have tried an external power source but no change, also checked the soldering again. I will try and troubleshoot. Maybe somebody else experiences a similar problem and...

After a couple of months finally got back to this, I did more research and found the CB2S chips in my devices were incorrectly marked on the silkscreen PCB, the...

Same problem with Fedora and kernel 6.9.

Thank you, I am running it and will give feedback as soon as I catch one. e.g. example of [TRACE] seen in log ``` [TRACE] After scheduled driver starts [TRACE]...

I captured numerous, see below. ``` Info:MAIN:Time 3928, idle 0/s, free 95336, MQTT 1(2), bWifi 1, secondsWithNoPing -1, socks 2/21 [TRACE] Entering OnEverySecond [TRACE] Before reading temp Starting bl602 now.......

> Could be done, but that requires modifying sdk. For now I disabled temp reading, lets see if it helps. Installed the build, can see 0.0 temp, so def. not...

12 hours and counting, and thus far no reboot problems. **Observation:** The device feels much more responsive, the temp. reading code in the SDK is prob. CPU intensive and it...

> I tried to make a version with the changes below: [dev_20240821_115931.zip](https://github.com/user-attachments/files/16691296/dev_20240821_115931.zip) > > (since I don't have a BL602, I can't test and there is a slight danger, this...

> > @MaxineMuster does this build also contain the trace statements by @giedriuslt just in case there are reboots to at least see where? > > Yes, my test-version is...

BENCH BL602 with serial logging using @MaxineMuster version: **12 hours no BL_RST and counting** LIVE BL602 without serial logging using @giedriuslt version: **36 hours no BL_RST and counting**