Request for Example and Explanation of Parameters in Calibration XML File

[cxn304]

Dear author,

I am using your software and I find it quite useful for my project. However, I am facing some difficulties in understanding the calibration XML file format. It would be extremely helpful if you could provide an example of a calibration XML file along with explanations for each parameter.

Specifically, I would appreciate clarification on the following parameters commonly found in the calibration XML file：

182.694 184.935 2428.49 2431.72 3.39496 0.0881161 0 0 -179.925 -14.7548 0.578387 1644 5.43174 970.919 211.986 191.741 2479.9 2484.28 2.99616 0.112661 0 0 179.77 14.7532 -0.617865 -1765.32 -49.9461 1075.75 for example , , , , ，, , ,,,.

[dicengine]

Take a look at the example I pointed you to in this issue: https://github.com/dicengine/dice/issues/305

The xml file you are looking at above is an alternate xml file version that is implemented in DICe so that VIC3D calibration files can be used with DICe. For your purposes, you should use the example in the issue above because the parameters are labeled. Hope that helps.

[cxn304]

Take a look at the example I pointed you to in this issue: #305

The xml file you are looking at above is an alternate xml file version that is implemented in DICe so that VIC3D calibration files can be used with DICe. For your purposes, you should use the example in the issue above because the parameters are labeled. Hope that helps.

thank you very much