dicengine
Images are skipped during the calibration process
Hello, I'm Yvan, a mechanical engineer student working on DIC. We tried to do a calibration with our new camera. We would like to use DICe as a DIC algorithm. We tried to do a calibration with DICe however lot of images were skipped even when we tried to play with the calibration option. In comparison, we also tried to do a calibration with VIC3D and we obtain good results. Have you an idea of why images are skipped with DICe? Here is a link to access our images: https://drive.google.com/drive/folders/1Qz_nyVJez9Q0A1REdjzHSJU7IH0AyVcr?usp=sharing Thanks for considering my request, Yvan
Hi Yvan, looks like the image files you sent the link to are locked. Can you make these available so I can see what's gong on?
By the way, you can simply use the VIC3D calibration if you want to instead of re-running the cal. Simply unzip the .z3d file and inside you will find a project.xml (or similar) file. You can supply that to DICe as the calibration file.
Hi, thank you for your response. I think the image files are locked because you're not logged to Google drive. For anonymous users, I think it's locked. With this dropbox link it should work: https://www.dropbox.com/sh/rsjyknpe62xu1h3/AADeW0-cm8otIwD6uNmhR3mpa?dl=0 We are going to try to import a calibration file.