David Hilton

Yeah, we disabled the D term as it was too sensitive to noise and disturbance. Any D term that could respond to changing temps would cause a much larger change...

The milliwatt output is clipped at 0 when temp is dropping, preventing negative wind up, and there is positive wind up but that's mostly ok - some overshoot is desirable...

It's great that so many people with control experience are chiming in! I'd like to make sure we're on the same page. The algorithm in the code you've been looking...

I re-tested with 2.14.1 with the 3 tips. The B2 is 5C over, the D24 and D2 are reading about 20C over. Thermal lag on the D24 and D2 is...

Hmmm - there is no way that the wattage correction code alone is responsible for that much drop, I'd expect to see a maybe 2-5*C correction at idle. There have...

21e3bab8d9e3b9ead3c3a990a2594d49049f2948 or a3f037fd1d1de4a77200a55cb59df53105234db1 or 27bf2a17110373cb1a30bed259ac2fbc1b374c5c or 627c4919989ad447f96f451d7d7d3e0c9e0ac4c0?

It looks like MMA8652FC has free-fall detection built in, which is pretty handy! > The detection of “Freefall” involves the monitoring of the X, Y, and Z axes for the...

That would be great, yeah! I could set up something to simultaneously record the internal thermocouple readings as well as read from an external thermocouple which would really help. For...

Sounds good!

I looked at the way the chart is rendered in garmin connect, it hits 2 endpoints of note. This is the first weight measurement of all time. I suspect there...