Drew Hess

With 19.07.2 on the R7800, the stock driver + firmware don't appear support dynamic VLANs at all: ``` Sun May 10 19:22:53 2020 daemon.notice hostapd: wlan0: CTRL-EVENT-EAP-RETRANSMIT2 d4:90:9c:d2:c4:67 Sun May...

I just tested the 2.4GHz interface with the CT snapshot, and it's the same as 5GHz -- no IPv6 traffic past the router until I ping the router address. So,...

I should also point out that in the statically bridged configuration (no dynamic VLAN, all wireless client traffic bridged to the same wired interface), 19.07.2 with the CT driver +...

I can reproduce this issue on completely different hardware and OS: * APU2E4 with WLE1216v5-20 mPCIe card. * NixOS running Linux 5.4.39, hostapd 2.9 configured for dynamic VLANs. Using different...

Sure, I'm happy to. The CT driver has been rock solid for me in OpenWRT 19.07.2 and the only thing missing is working IPv6 in dynamic VLAN mode! I'll post...

APU2E4, NixOS, Linux 5.4.39, stock driver, CT firmware (non-htt-mgt): IPv6 doesn't work until I ping the router. (No other changes to config.) Here's the relevant dmesg: ```` [ 11.257903] ath10k_pci...

And, as you might have guessed: APU2E4, NixOS, Linux 5.4.39, CT driver, stock firmware: IPv6 works out of the box. ``` [ 11.293651] ath10k 5.1 driver, optimized for CT firmware,...

Wow, that's a lot of builds :) I assume that, e.g., `firmware-5-full-community-commit-218-65a183480.bin` precedes `firmware-5-full-community-commit-219-17a168111.bin`, etc?

I understand the concept :) Working on it now, I'll get back to you ASAP.

Most of these builds don't support AP VLAN, which means they don't exhibit the dynamic VLAN problem with IPv6 because they don't support dynamic VLANs ;)