Scan Fails, Servers up and working

[Contra28]

I used the debugger to check what was going on here and it shows successes on the scans then moves from in progress to failed t. Is this still due laggy servers?

DEBUG=pokego-scan pokego-scan -- 45.423312,-75.698452 pokego-scan https://pokevision.com/map/scan/45.423312/-75.698452 +0ms pokego-scan { statusCode: 200, body: { status: 'success', jobId: '6d1d6a4944dbe4a8e4886f3bd7b19b10' } } +154ms pokego-scan https://pokevision.com/map/data/45.423312/-75.698452/6d1d6a4944dbe4a8e4886f3bd7b19b10 +17ms pokego-scan { statusCode: 200, body: { status: 'success', jobStatus: 'in_progress' } } +78ms pokego-scan job in progress, retry in 1500ms (attempt 2 of 10) +0ms pokego-scan https://pokevision.com/map/data/45.423312/-75.698452/6d1d6a4944dbe4a8e4886f3bd7b19b10 +2s pokego-scan { statusCode: 200, body: { status: 'success', jobStatus: 'in_progress' } } +66ms pokego-scan job in progress, retry in 3000ms (attempt 3 of 10) +1ms pokego-scan https://pokevision.com/map/data/45.423312/-75.698452/6d1d6a4944dbe4a8e4886f3bd7b19b10 +3s pokego-scan { statusCode: 200, body: { status: 'success', jobStatus: 'in_progress' } } +63ms pokego-scan job in progress, retry in 4500ms (attempt 4 of 10) +1ms pokego-scan https://pokevision.com/map/data/45.423312/-75.698452/6d1d6a4944dbe4a8e4886f3bd7b19b10 +5s pokego-scan { statusCode: 200, body: { status: 'success', jobStatus: 'in_progress' } } +76ms pokego-scan job in progress, retry in 6000ms (attempt 5 of 10) +0ms pokego-scan https://pokevision.com/map/data/45.423312/-75.698452/6d1d6a4944dbe4a8e4886f3bd7b19b10 +6s pokego-scan { statusCode: 200, body: { status: 'success', jobStatus: 'in_progress' } } +1s pokego-scan job in progress, retry in 7500ms (attempt 6 of 10) +0ms pokego-scan https://pokevision.com/map/data/45.423312/-75.698452/6d1d6a4944dbe4a8e4886f3bd7b19b10 +8s pokego-scan { statusCode: 200, body: { status: 'success', jobStatus: 'in_progress' } } +74ms pokego-scan job in progress, retry in 9000ms (attempt 7 of 10) +0ms pokego-scan https://pokevision.com/map/data/45.423312/-75.698452/6d1d6a4944dbe4a8e4886f3bd7b19b10 +9s pokego-scan { statusCode: 200, body: { status: 'success', jobStatus: 'failure' } } +76ms error: Unable to scan for pokemon. If this continues to fail then the Pokemon servers are currently unstable or offline.

[zosiu]

@Contra28 I just run the same thing you did, and I got results back, so yeah, most probably server lag/issues.

[Contra28]

Sounds good to me, will try later

[dgoguerra]

Thats right, its an error from the server, nothing to do there other than rescanning.