Castle Link and Teensy LC

[jdowdle]

Im getting Telemetry, the values looked saturated, but tried throttle and it is unresponsive now. I enabled feature "Live Link Enable" on the other page of Castle Link 3.85.00. It is confusing that the ?help button describes this as a USB telemetry, I hope I enabled the correct option.

I currently have the esc input connected to 2 & 6 on the teensyLC, with a 3.3k to 5 V. Your doc on the Castle branch shows using 5V pullup in the Castle/Teensly LC schematic, the table is silent on what to pullup to. The main branch shows pullup to 3.3V for Castle. I am confused whether I should be using the main branch with Castle link configured, or the Castle branch. Started with Main, now have Castle programmed.

I initially connected the throttle out from Receiver to pin 22 as shown in the schematic in the Main branch, but have corrected to pin 16 now.

BTW, I get no ESC beeping when I apply power, but noticed when I disconnect receiver power I get the startup ESC beeps. But no throttle response with power on after that. I verified that Live Link Enable is active in the Castle Link programming tool.

I believe thats it, any ideas? thanks.